SPEEDLINE Grand Prix
#31
1 week!!
#33
Please make the rain go away!!!!!!!
#35
I went to http://www.mikeshobbyshop.com and checked out the track pics, but I only saw indoor tracks. Are you guys racing inside??
#36
Originally Posted by Scott Fisher
Don't talk about rain. I have to bust my butt when I get back to the good old USA just to get my car finished in time.
Hmmm.... If I recall correctly, you've had your kit since February 5th!
Last edited by rmdhawaii; 03-16-2007 at 11:14 PM.
#37
Originally Posted by rmdhawaii
I went to http://www.mikeshobbyshop.com and checked out the track pics, but I only saw indoor tracks. Are you guys racing inside??
http://hometown.aol.com/GulfcoastRCt...strctrack.html
#38
Originally Posted by MRX4-R03
Hey hawaii mike has two different shops one in dallas and one in houston, the one in houston has both on road and off road track!
http://hometown.aol.com/GulfcoastRCt...strctrack.html
http://hometown.aol.com/GulfcoastRCt...strctrack.html
The flyer says "Gulf Coast Raceway" and the track the race is being held at is "Gulf Coast RC Track"...
Also, see ROAR info: http://www.roarracing.com/region9.php
Plus, there are three Web sites..
1. http://www.mikes-hobbyshop.com
2. http://www.mikeshobbyshop.com
3. http://hometown.aol.com/gulfcoastrct...strctrack.html
And for those that didn't know, there is a Gulf Coast RC Track thread at RCTech.net is here:
http://rctech.net/forum/showthread.p...&page=11&pp=30
Could someone please help Mike clean up his Web sites...?
#39
Originally Posted by Scott Fisher
Don't talk about rain. I have to bust my butt when I get back to the good old USA just to get my car finished in time.
today! Front end is complete .... that's about it!
When are you getting in? How about Brad?
See ya there!
T
#40
Tech Elite
iTrader: (28)
Originally Posted by T-BODZ Terry B.
Don't feel bad Scott, I just began putting my new car together
today! Front end is complete .... that's about it!
When are you getting in? How about Brad?
See ya there!
T
today! Front end is complete .... that's about it!
When are you getting in? How about Brad?
See ya there!
T
#41
Originally Posted by Scott Fisher
MY car is almost done. I just have to put an engine in, make the throttle and brake linkage and then setup the car and radio. Paint a few bodies and I am good to go. Brad, Bill and I all come in on Wednesday night on the same flight. See you on Thursday Terry.
Also, check that the blue aluminum part of the sway blade is not rubbing on the belt. Not sure if you caught that post in the RRR thread, but you may need to grind it down.
Good luck at the race.
#42
Tech Elite
iTrader: (28)
Unfortunately there is no time for a test drive so it will be on the job training for me. I looked at the blue sway bar pivot and it clears with plenty of room. The reason is when I put the sway bar links together I used a longer ball cup in order to make the links a bit longer. I have plenty of room.
One issue I am having is that the rear diff leaks a lot. I may have to take it apart and see if I can find a build issue or get some sealer.
Thanks for the tips.
One issue I am having is that the rear diff leaks a lot. I may have to take it apart and see if I can find a build issue or get some sealer.
Thanks for the tips.
#43
Originally Posted by Scott Fisher
Unfortunately there is no time for a test drive so it will be on the job training for me. I looked at the blue sway bar pivot and it clears with plenty of room. The reason is when I put the sway bar links together I used a longer ball cup in order to make the links a bit longer. I have plenty of room.
One issue I am having is that the rear diff leaks a lot. I may have to take it apart and see if I can find a build issue or get some sealer.
Thanks for the tips.
One issue I am having is that the rear diff leaks a lot. I may have to take it apart and see if I can find a build issue or get some sealer.
Thanks for the tips.
Mine always leak if I use the rubber o-ring.
Also, here is a separate KB on the Front Diff, that is only posted in the forum.
http://www.nitrokb.com/phpBB2/viewtopic.php?t=17
#44
Originally Posted by rmdhawaii
Make sure you take it out for a test drive before you fly out. The Kyoshos drive a little differently than the Mugens and I think you're in for a few surprises. Just be sure you have a full selection of diff oils and gears handy.
Also, check that the blue aluminum part of the sway blade is not rubbing on the belt. Not sure if you caught that post in the RRR thread, but you may need to grind it down.
Good luck at the race.
Also, check that the blue aluminum part of the sway blade is not rubbing on the belt. Not sure if you caught that post in the RRR thread, but you may need to grind it down.
Good luck at the race.
#45
Originally Posted by MCRUZ
I'm sure Scott will do just fine. We will all be there to help him.