Xray NT1
#2506
Tech Elite
iTrader: (30)
I have a question about the hard bumper. I have one of the hard bumpers and realized that it is significantly heavier than the stock bumper, just wondering if anyone who's using this bumper can tell me if this added weight in front of the car has affected the way the car handles in regards to steering or anything else i should consider
#2507
Your really needy today.. a Couple grams on the nose most people won't notice.. add an oz and people notice.. I have used it and noticed small diff, but It wasn't anything I would change setup ride height or anything for. You crash a lot, use it.. don't crash.. don't use it. 80% of the time I use the stock bumper.. If your really worried about parts breakage get the wide front bumper (lower plastic deal)
#2509
stop picking on i'm going to tell mom.... We all dont have 1:1 scale racing knowledge to use as a database for knowledge
#2511
anyhow will have continue the rc school for me brother, tommorrow bc its 12:15 on the east coast and i have to be up to early
#2513
#2514
Tech Champion
iTrader: (10)
hi guys will the white kyosho clutch weights fit the xray?
these items below:
http://rc-mushroom.com/product_info....oducts_id=4071
also do they kyosho clutch shoes fit?
final question, are the xray nuts that keep the pivot balls in the hubs 10mm? i'd like to install the kyosho blue bling versions listed on the below link
http://rc-mushroom.com/product_info....ducts_id=10936
these items below:
http://rc-mushroom.com/product_info....oducts_id=4071
also do they kyosho clutch shoes fit?
final question, are the xray nuts that keep the pivot balls in the hubs 10mm? i'd like to install the kyosho blue bling versions listed on the below link
http://rc-mushroom.com/product_info....ducts_id=10936
#2515
they do fit tomb.snowy explained that he built the clutch as per manual,and wasnt engaging to his liking ,so he cut the fly weights .i did the same but keep all the peices in order.the kyosho white weights are a better option as posted previously on this thread.can u get me a set aswell???????
the pivot ball caps are aprox 9mm on the nt1 so prob no they wont fit ,i used plumbers thread tape to stop em winding out as they are a loose fit .thread lock didnt seem to work
the pivot ball caps are aprox 9mm on the nt1 so prob no they wont fit ,i used plumbers thread tape to stop em winding out as they are a loose fit .thread lock didnt seem to work
Last edited by Z-Mann; 01-21-2008 at 06:39 AM.
#2516
I had used the mugen ones at first, but went back to the Xray ones, they seem to fit better, and all I did was put a drop of lock tight on the threads, lit it dry then put them on. now I don't have any issues with them backing out.
#2518
#2520
just got my 08 setup today.