Xray NT1
#6543
Tech Rookie
...and what about the release of the new front arb?
#6545
#6546
Tech Elite
iTrader: (11)
I haven't tried with the GRP yet, spent 15 hours doing a trip to Sydney yesterday and now trying to get course finished for Friday
I think next friday night isn't for a few more weeks i don't think and Abbey tells me her Getz is broken now, i am sure we will still come in some shape or form
#6548
Tech Rookie
In this period of the year it's difficult for me to do on track, so I prefer to do some modding.
In your opinion it's possibile to mount the T4 front arb on Nt1 pro?
In your opinion it's possibile to mount the T4 front arb on Nt1 pro?
#6549
#6551
i use it as a quick tune to see what direction to go. And i always end up using
normal at the rear and -0,75 at the front. Thats because i like a wide rear and a smal front . And the CVD doesn`t jam this way. It seems to give less roll through the turns, so its a personal preference.
normal at the rear and -0,75 at the front. Thats because i like a wide rear and a smal front . And the CVD doesn`t jam this way. It seems to give less roll through the turns, so its a personal preference.
#6552
Tech Elite
iTrader: (11)
i use it as a quick tune to see what direction to go. And i always end up using
normal at the rear and -0,75 at the front. Thats because i like a wide rear and a smal front . And the CVD doesn`t jam this way. It seems to give less roll through the turns, so its a personal preference.
normal at the rear and -0,75 at the front. Thats because i like a wide rear and a smal front . And the CVD doesn`t jam this way. It seems to give less roll through the turns, so its a personal preference.
I got the GRP in okay, not a lot of room and just not a fan of the engine mounting system at all.
Have an annoying electrical glitch now, LiFe battery I can't get any power out of even though it is fully charged. And with another battery getting power brown outs.
#6553
LiFe batteries
What LiFe reciever packs fit? Thanks.
#6554
Tech Fanatic
iTrader: (11)
#6555
Brake question
Hey guys, I just started building my pro kit. In step 2, the glued brake pad set says to have the round holes oriented on top and oval on the bottom with fiber pads facing together.
The problem is one pad must have been glued on the wrong side because to face the fiber side together the hole are opposite. Should I mount them as is with 1 round and 1 oval on top and bottom or just get another set?
Thanks
The problem is one pad must have been glued on the wrong side because to face the fiber side together the hole are opposite. Should I mount them as is with 1 round and 1 oval on top and bottom or just get another set?
Thanks