Serpent 720
#1442
Originally Posted by rc_alan
I thought the same thing, but since he posed his question here... I figured I would give him some area's to look at/check as these tips would help anyone with the 720 looking for tractions regardless of track... Oh, I've driven the IFMAR 2004 world cup track at Brazil for over a year... On VRC...
RC_Alan
RC_Alan
#1443
Tech Fanatic
Originally Posted by serpentpro28
bro just want to know if i can use my own transmitter,instead using the one that comes with it.
http://www.virtualrc.com/game/games.aspx
RC_Alan
#1444
Tech Apprentice
Originally Posted by Winner's Circle
I have the pinions in stock for the 710/720. The internal gear ratio is different on the 720 from the 710 so the cars require different gearing.
how much are you saling them for? im looking for pinoins 16 and 23, spurs 55 and 61. I sent you a pm
#1445
Tech Adept
Hi,
I try 22t front side pulley to give some over drive to my 720. It worked very well and the belt tension is very good now.( with pro side belt) And you can use the old alu 22t pully too.
I try 22t front side pulley to give some over drive to my 720. It worked very well and the belt tension is very good now.( with pro side belt) And you can use the old alu 22t pully too.
#1446
Tech Adept
iTrader: (8)
Originally Posted by rcjayy
winner's circle
how much are you saling them for? im looking for pinoins 16 and 23, spurs 55 and 61. I sent you a pm
how much are you saling them for? im looking for pinoins 16 and 23, spurs 55 and 61. I sent you a pm
#1447
Originally Posted by deepfree_z
Hi,
I try 22t front side pulley to give some over drive to my 720. It worked very well and the belt tension is very good now.( with pro side belt) And you can use the old alu 22t pully too.
I try 22t front side pulley to give some over drive to my 720. It worked very well and the belt tension is very good now.( with pro side belt) And you can use the old alu 22t pully too.
Anybody have try the 21 pulley for side'please post what's the impact'Thanks'
#1448
Registered User
Hey does anyone know what happened to serpent at the worlds..looked like they didnt even show up....also is anyone else having problems with the cvd's
#1449
Originally Posted by speedygonzalez
Hey does anyone know what happened to serpent at the worlds..looked like they didnt even show up....also is anyone else having problems with the cvd's
As for CVD's, I have them installed and they work great. What problems are you experiencing?
#1450
hmm
hey JO when you racing again
#1451
Originally Posted by SOLOARTIST 702
hey JO when you racing again
#1452
hmm
ok see you then
#1453
Originally Posted by speedygonzalez
Hey does anyone know what happened to serpent at the worlds..looked like they didnt even show up....also is anyone else having problems with the cvd's
#1454
Tech Adept
720 and 710 uses the same belts, i have installed my old probelts to my 720. As the default setup shows, you should use 22T mid side pully and 21t side-2sp pully in 720. When you use the old 22t side-2sp pully, you get the same effect as the 21t mid-side pully in 710. It gives you some overdrive, so the front tires spins faster than rears. With this setup you can use the same hardness tires for front and rear and get equal wear. By the way you should give 2-3 mm split.
#1455
Tech Adept
Originally Posted by serpentpro28
use the original serpent cvd,don't use the 3racing it's break easily