Serpent 720
#1696
Tech Addict
iTrader: (1)
Originally Posted by Bundy_Bear
B4:
Thank you... I have been looking at Mushy and their prices. I bought a S710 when they first came out, i had issues with the clutch and blowing thrust bearings and also broke a front dogbone in half, buggered if i know what i hit to cause that. That was sorta the last straw and i could see it wasn't going to withstand my bashing.
I am now having similar quality issues with the G4S... or it could be just my bad driving
BB
Thank you... I have been looking at Mushy and their prices. I bought a S710 when they first came out, i had issues with the clutch and blowing thrust bearings and also broke a front dogbone in half, buggered if i know what i hit to cause that. That was sorta the last straw and i could see it wasn't going to withstand my bashing.
I am now having similar quality issues with the G4S... or it could be just my bad driving
BB
Always happy to answer your questions as others have done for me.
#1697
Tech Elite
Serpent 720 WINS State Race #4 at Homestead r/c Raceway in Florida.
#1699
Originally Posted by dj apolaro
Serpent 720 WINS State Race #4 at Homestead r/c Raceway in Florida.
#1700
Tech Elite
Originally Posted by Doug M
You drove a great race DJ, not letting the turm marshal blunder getting you down. Your 720 looked so good, especially when it was gliding through the esses with ease leaving the others in your dust. You gave yourself a very good birthday present!!!! Congratulations!!!! Will you be at Homestead RC Raceway for the benefit race this Sunday?
#1702
Tech Regular
iTrader: (8)
Florida State Race # 4 Results
12 GAS SEDAN - A Main Results
Pos Name Engine & Fuel Car
1 D.J. Apolaro - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
2 Danny Horta - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
3 Andrew Duperrouzel - Maxy's Engine Mod & Maxy's Fuel - Mugen MTX-4
4 Art Carbonell - Maxy's Fuel - Mugen MTX-4
5 Rafael Angulo - Maxy's Fuel - Serpent 720
6 Luke Whitaker - Maxy's Fuel - Serpent 720
7 Ryan Rhodes - Mugen MTX-3
8 Robert Maestrey - Kyosho RRR
9 Eduardo Cabal -Maxy's Fuel - Serpent 720
10 Daniel Onorato - Maxy's Fuel - Serpent 720
11 Roniel Regalado - Maxy's Fuel - Serpent 720
12 Gianni Giorgo - Maxy's Fuel - Serpent 720
Congrats Guys God Job
Pos Name Engine & Fuel Car
1 D.J. Apolaro - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
2 Danny Horta - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
3 Andrew Duperrouzel - Maxy's Engine Mod & Maxy's Fuel - Mugen MTX-4
4 Art Carbonell - Maxy's Fuel - Mugen MTX-4
5 Rafael Angulo - Maxy's Fuel - Serpent 720
6 Luke Whitaker - Maxy's Fuel - Serpent 720
7 Ryan Rhodes - Mugen MTX-3
8 Robert Maestrey - Kyosho RRR
9 Eduardo Cabal -Maxy's Fuel - Serpent 720
10 Daniel Onorato - Maxy's Fuel - Serpent 720
11 Roniel Regalado - Maxy's Fuel - Serpent 720
12 Gianni Giorgo - Maxy's Fuel - Serpent 720
Congrats Guys God Job
#1703
Originally Posted by Acid
Hi Guys
Has anyone used extra weight on their 720 to try and balance their car? Or used a digital weight distribution system?
If you have, did you purchase a system or is there another way of doing this?
Can anyone help?
Acid
Has anyone used extra weight on their 720 to try and balance their car? Or used a digital weight distribution system?
If you have, did you purchase a system or is there another way of doing this?
Can anyone help?
Acid
For the ultimate obsession: integy.com
http://integy.automated-shops.com/cg...?p_prodid=2152
jack
#1704
Hi Guys
I am about to install 2 x Futaba 9550 servos into my new S720 and i am not sure if i should use those thin plastic spacers supplied with the kit. The instructions do not show them being used:S
Also, when i rotate the 2 speed shaft there is abit of a clicking noise... I am guessing it is from the brake disc as when i put my finger on the disc it goes away...
Look forward to hearing from you all soon
I am about to install 2 x Futaba 9550 servos into my new S720 and i am not sure if i should use those thin plastic spacers supplied with the kit. The instructions do not show them being used:S
Also, when i rotate the 2 speed shaft there is abit of a clicking noise... I am guessing it is from the brake disc as when i put my finger on the disc it goes away...
Look forward to hearing from you all soon
#1705
S710_Nut
You dont need to use them but make sure you use the rubber groument that come with the servo,about the clicking sound it also could be your belt that its not centered....
You dont need to use them but make sure you use the rubber groument that come with the servo,about the clicking sound it also could be your belt that its not centered....
#1706
YES! Well done DJ and the others too ...
Originally Posted by maxy
12 GAS SEDAN - A Main Results
Pos Name Engine & Fuel Car
1 D.J. Apolaro - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
2 Danny Horta - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
3 Andrew Duperrouzel - Maxy's Engine Mod & Maxy's Fuel - Mugen MTX-4
4 Art Carbonell - Maxy's Fuel - Mugen MTX-4
5 Rafael Angulo - Maxy's Fuel - Serpent 720
6 Luke Whitaker - Maxy's Fuel - Serpent 720
7 Ryan Rhodes - Mugen MTX-3
8 Robert Maestrey - Kyosho RRR
9 Eduardo Cabal -Maxy's Fuel - Serpent 720
10 Daniel Onorato - Maxy's Fuel - Serpent 720
11 Roniel Regalado - Maxy's Fuel - Serpent 720
12 Gianni Giorgo - Maxy's Fuel - Serpent 720
Congrats Guys God Job
Pos Name Engine & Fuel Car
1 D.J. Apolaro - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
2 Danny Horta - Maxy's Engine Mod & Maxy's Fuel - Serpent 720
3 Andrew Duperrouzel - Maxy's Engine Mod & Maxy's Fuel - Mugen MTX-4
4 Art Carbonell - Maxy's Fuel - Mugen MTX-4
5 Rafael Angulo - Maxy's Fuel - Serpent 720
6 Luke Whitaker - Maxy's Fuel - Serpent 720
7 Ryan Rhodes - Mugen MTX-3
8 Robert Maestrey - Kyosho RRR
9 Eduardo Cabal -Maxy's Fuel - Serpent 720
10 Daniel Onorato - Maxy's Fuel - Serpent 720
11 Roniel Regalado - Maxy's Fuel - Serpent 720
12 Gianni Giorgo - Maxy's Fuel - Serpent 720
Congrats Guys God Job
#1707
Tech Elite
Originally Posted by Sow&Steady
YES! Well done DJ and the others too ...
The clicking could also be if you have the brake pully pushed in too far.
#1708
Originally Posted by Roniel_R
S710_Nut
You dont need to use them but make sure you use the rubber groument that come with the servo,about the clicking sound it also could be your belt that its not centered....
You dont need to use them but make sure you use the rubber groument that come with the servo,about the clicking sound it also could be your belt that its not centered....
Thank you
I have ditched those rubber grommets off the servo along time ago... any tips for installation without them for the Futaba 9550?
Also with the belt, could it be the shield on the brake pulley being around the wrong way? I know it caused the belt to click on my G4 when it was incorrect?
#1709
I have ditched those rubber grommets off the servo along time ago... any tips for installation without them for the Futaba 9550?