Body Wraps
#1
Body Wraps
I installed an Upgrade body wrap on a Losi Eu body and had a really hard time.Is there an easy way to install these wraps?
#3
Tech Lord
iTrader: (148)
Take your time and don't stick it all at once. Start at the top and worn your way down. I have installed many upgrade and other company skins and it just takes a little patience. Never install a skin that's cold. Hit it with a hair dryer but take your time is the most important part. I also hit the body and wing with 600-800 sand paper to help it stick a little better. But roll it from the top to bottom making sure that you get all the bubbles out. Upgrade says not to use any windex. Idk
#9
Tech Elite
iTrader: (24)
Like Frank and Jaz said. Take ur time and use a heatgun/blow dryer to warm up graphic. This makes it alot easier to work with and flexable to get corners/creases nicely set. Also light sand paper is a good idea as far as longevity of wrap for sticking but its not a real manditory thing unless ur can make a body last a long time like most don't. But if u plan on just using it for mains or big races and would like it to last i would sanpaper it. Also the windex does a great job so ur not sticking and pulling up then re-trying.