R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro Off-Road

Reply
 
Thread Tools Search this Thread
Old 10-01-2010, 02:00 AM   #1
Tech Rookie
 
Join Date: Sep 2010
Posts: 7
Default MY HPI RUSH WONT STEER HELPP !!!!!

hi my hpi rush wont steer and makes a funny noise when the electrics are on any advise ???
stevenhpirush is offline   Reply With Quote
Old 10-01-2010, 06:04 AM   #2
Tech Elite
 
NitroXray80809's Avatar
 
Join Date: Mar 2010
Location: Bakersfield, California
Posts: 3,249
Trader Rating: 24 (100%+)
Default

Could be damaged servo or servo horn/saver. Take the servo out and remove it from any steering or horns and see if it still makes the noise. If so the servo is hurt, if no noise then look at ur threads in the servo horn and on the servo and see if they look stripped. Then once everything is replaced dont just put every thing back on assuming its all centered. What you do is install the servo, but dont put the steering horn back on yet. Then you turn your radio on then the car and this will center your servo. Turn the car off then radio and put ur servo horn on with the tires as straight a possible then screw the hown down. Now turn the radio and car back on and you should have 100% steering again. Hope this helped.
__________________
Xray XB4 | Ko-Propo | Savox | Hobbywing | SpeedPassion | JC |

Kyosho RB6 | Ko-Propo | Futaba | Turnigy | Orion | JC |

AE T4.2 | Ko-Propo | Savox | Turnigy | ProTek | JC |
NitroXray80809 is offline   Reply With Quote
Old 10-01-2010, 07:15 AM   #3
Tech Fanatic
 
SteveP's Avatar
 
Join Date: Mar 2002
Location: So Cal
Posts: 918
Default

You should post a lot more detail, which would make it easier to help you. Depending on many things, it may be a matter of driving it different, or it could be your set-up. List more information in your post and that will help everyone whittle it down to the proper solution.

Tell everyone your skill level (beginner is OK), and when you're having problems with the steering. Is the truck stock, or have you made changes to the set-up. If so, what did you change? Exactly where is the truck not steering? Anywhere, or in certain sections of a track? Corner entry, corner exit, big sweepers, tight 180-degree turns? You get the hint I'm sure. More info from you means better answers that will help to solve your issues.
SteveP is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:40 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net