Marzac2

iTrader: (12)

***Tekno RC D8//D8T/Ve8/Vorza Hot New Releases***

New Stub Axles and Diff Couplers for the popular D8 series of vehicles. Hardened steel, precision tolerances & snap rings ensure worry free usage. Center shaft couplers and stub axles also come with 3 sets of drive pin holes to extend the life of each part. These are the latest must have performance parts from Tekno RC.

TKR20036 - Tekno RC Stub Axles (Hot Bodies D8/D8T/Ve8/Vorza, w/pin retainers)
MSRP - $24.99

TKR20037 - Tekno RC Center Shaft Coupler (Hot Bodies D8/Ve8/Vorza, w/pin retainers)
MSRP – $24.99

TKR20038 - Tekno RC Center Shaft Coupler (Hot Bodies D8T, w/pin retainers)
MSRP - $27.99

TKR20029 - Tekno RC Pin Retainers (Hot Bodies D8/D8T/Ve8/Vorza, 2pcs)
MSRP -$4.99

TKRH67819 - Tekno RC Lightened LCG Chassis for Hot Bodies D8T Truggy (nitro)
MSRP - $139.99 (available for ~$100)

Simply put, the Tekno RC Lightened LCG Chassis is the ultimate chassis upgrade for your Hot Bodies D8T Nitro Truggy. Here's why:

• 37g/1.4oz lighter than stock, stock chassis is 365g, Tekno chassis is 328g
• Low CG cutout design lowers engine and radio tray by 1mm, fuel tank lowered by 2mm
• Integrated droop screws for more precise droop adjustment and better wear (includes screws too)
• CNC machined (not stamped) from 4mm aircraft grade 7075-T6 aluminum
• Hard anodized for increased wear resistance
• Beveled (chamfered) underside edge to help cruise over rough terrain
• Alternate rear chassis brace holes for use with shorter Losi 8 rear chassis brace for increased flex tuning (brace included!!!)

Visit www.TeknoRC.com for more information. Distributed by Great Planes, HRP Distributing, and SK Motion. Are you a dealer or distributor? Contact us!

rcgeezer

Are these couplers lightened compared to the stock parts, or just made from a more durable product? I'm trying to understand why I should put all of these products on my D8T? Also, any factory guys have any comments having tested this stuff? Thanks much!!

NitroOB4You

iTrader: (36)

I can't comment on these specific items. But the guys @ Tekno rock!. I've had very good service from them and excellent quality products. Would love to try these on my D8/T vehicles...but right now tires and fuel is more important :P Lol.

bboard

iTrader: (1)

Not sure on weight, but they are stronger and have the CVD pin retainer

fallguy

iTrader: (3)

your Hard anodized parts are pretty long wearing... im kinda shocked how little paint is gone from the bottom of my V3 MBX6T kit..

Marzac2

iTrader: (12)

Thanks for the comments. The parts are not any lighter, but as bboard and fallguy pointed out, they are stronger and will be less trouble compared to the stockers due to the pin retaining ring. Also since they have 3 sets of drive pin holes, you can move the pin 2 more times after the first holes show any wear. This essentially extends the life of the part a lot.

micrors4guy

iTrader: (50)

I would like to see these in Al.

DPowers

iTrader: (86)

I was going to buy some but the was out of stock i need some to show the guys around here how good they hold up versus the stock one.

Marzac2

iTrader: (12)

They are all in stock at Imapkt RC.

rcdude236

iTrader: (12)

Well i know this isnt a new part but i just order the tekno front shock tower for my d8 today. We will see how it works this weekend

Marzac2

iTrader: (12)

Almost forgot to share that we also have these 5 shock towers to outfit the front and rear of Hot Bodies vehicles.



*Tekno RC Shock Tower (D8/Ve8/Vorza, front, 7075 aluminum, 5mm thick, hard anodized) [TKR20034]



*Tekno RC Shock Tower (D8B, rear, 7075 aluminum, 5mm thick, hard anodized, for 112mm shocks, multiple wing mount options) [TKR20032]



*Tekno RC Shock Tower (D8B, rear, 7075 aluminum, 5mm thick, hard anodized, stock mount, multiple wing mount options) [TKR20031]



*Tekno RC Shock Tower (D8T, front, 7075 aluminum, 5mm thick, hard anodized) [TKR20035]



*Tekno RC Shock Tower (D8T, rear, 7075 aluminum, 5mm thick, hard anodized, multiple wing mount options) [TKR20033]

rcdude236

iTrader: (12)

does the front one add weight you think? I mean it has a different design and it is 5mm so id think if it did it would be very small amount

gotspeed_2000

iTrader: (12)

Hi, since this thread is about new tekno parts I was wondering if anyone had information on whether a V3 brushless conversion kit for the D8T is anywhere near release? I'm gonna convert a D8T to brushless and want to see if Tekno is gonna come out with a kit.
Thanks.

Marzac2

iTrader: (12)

There will be very limited qty of these released. Better to check and ask in THIS forum for our brushless kits. Or even give us a call during our business hours. Check Tekno RC for details.

gotspeed_2000

iTrader: (12)

Thanks for the info. I have posted to that forum page and will contact tekno directly either tomorrow or the day after.