Ofna fuel bottle - softning the plastic?
hey i recently bought an ofna fuel bottle and it is great except the plastic is really hard and it is difficult to squeeze the fuel out of. How could I soften up the plastic to make refueling with it easier?
|
Dont know if it will work, but try boiling it for like 5-10 minutes.
|
Originally Posted by portyansky
(Post 7467255)
Dont know if it will work, but try boiling it for like 5-10 minutes.
|
because it will get hard again after if cools, its the type of plastic they use...
|
If you don't have the strength to squeeze
the Ofna bottle, then you should buy a softer bottle. Maybe you should buy a fuel gun instead? Just make sure the trigger spring isn't too much for you. You should be able to hold it open for at least ten seconds, before your hand starts to shake. |
Originally Posted by rageworks
(Post 7467369)
If you don't have the strength to squeeze
the Ofna bottle, then you should buy a softer bottle. Maybe you should buy a fuel gun instead? Just make sure the trigger spring isn't too much for you. You should be able to hold it open for at least ten seconds, before your hand starts to shake. |
Originally Posted by rageworks
(Post 7467369)
If you don't have the strength to squeeze
the Ofna bottle, then you should buy a softer bottle. Maybe you should buy a fuel gun instead? Just make sure the trigger spring isn't too much for you. You should be able to hold it open for at least ten seconds, before your hand starts to shake. |
thats funny.
|
Originally Posted by Inertia
(Post 7467117)
hey i recently bought an ofna fuel bottle and it is great except the plastic is really hard and it is difficult to squeeze the fuel out of. How could I soften up the plastic to make refueling with it easier?
I know it's not the answer you were after, but it IS a great bottle. http://www3.towerhobbies.com/cgi-bin...&I=LXWGE2&P=SM |
I have some small Ofna bottles and they are super soft. That it was keeps me from having to work out at the gym.
|
one way to soften it would be to fill it with fuel and put the rubber cap on the nozzle. set it in a warm spot (outside?) for a while. fuel has a tendency to seep through plastic over time and this could soften it up.
|
Yep our Ofna bottles are tough look at former Ofna man Paul Coleman-:sneaky:
|
Originally Posted by Jon Moore
(Post 7467736)
Check out the O'Donnell bottle. It's soft and so far has stayed consistent for a season and a half.
I know it's not the answer you were after, but it IS a great bottle. http://www3.towerhobbies.com/cgi-bin...&I=LXWGE2&P=SM |
When squeezing the bottle if you feel something snap in your groin and you pass gas, that's a sign that the bottle may be a little too strong for you. :sneaky:
|
Forearm workout
http://www.amazon.com/Gripmaster-Exe.../dp/B0006GBDZY
I think that is what you need, get to squeezing!! |
All times are GMT -7. It is currently 09:10 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.