Fatam

iTrader: (6)

I just bought a rc8 factory team with a novarossi 21 bf and a jp2 pipe. I know I like the AE but any thoughts on the engine and pipe? I have never raced and want to make the jump from basher to racer. I can talk nitro trucks all day but not buggys and truggys. Thanks for any and all feedback.

gholt13

iTrader: (8)

engine is a good little mill run good all day i have 2 of them as for the pipe get you a 086 top end big track or 053 smaller track both will get good fuel mileiage

Fatam

iTrader: (6)

Thanks for the info. I figure it will be a good first little buggy

losiracer78

The 086 is the best all around pipe and header for the 21 bf

jbright33

iTrader: (15)

^^^^what they said lol

inferno13

iTrader: (202)

i used a 053 on my .21bf last week and run time was crazy! im not going to tell you how long it ran on a tank for the purpose of everybody jumping in and saying it is not possible, but 086 or 053 is your best pipe for this mill

Fatam

iTrader: (6)

Now are we talking about the dynamite 086 or the ofna 086?

DOMIT

iTrader: (1)

086 is 086...

And the BF is a good little engine...

inferno13

iTrader: (202)

it was ofna if it matters, and had a 14 minute run time on large track running hard, if you know me its wide open throttle all the time...lol

Quad Racer 34

iTrader: (4)

the dynamite pipes are better built though imo. i had a stinger get bent on my ofna 053 pipe couple races after i put it on my buggy and bought a dynamite 086 pipe and it has a brace on it to keep it from bending. the dynamite pipes are cheaper anyways.

Fatam

iTrader: (6)

I got the dynamite .21 plat, and the dynamite 053 pipe on my rc8.