what do u think losi 8 t 1.0 with 2.0 body
#16
#18
Suspended
iTrader: (202)
how did u do double mounts? i have one single mount
used the two holes dead center of the shock tower above the diff
and cut down a 1.0 body mount did u drill holes in ur tower and use 2.0 mounts? or is that a 2.0 shock tower?
and what brand wing is that does it work good looks agressive
used the two holes dead center of the shock tower above the diff
and cut down a 1.0 body mount did u drill holes in ur tower and use 2.0 mounts? or is that a 2.0 shock tower?
and what brand wing is that does it work good looks agressive
#19
Suspended
iTrader: (202)
dint know there was a right or wrong, i use what works for me, and according to the differnt tracks i run, ran 2 weeks ago at nitro rising race a took third, so i dont feel i did to bad, or with 0 offsets, do you think i would have took 1st or 2nd....lol, also 1st-2nd-3rd place where all losi 1.0.....lmao
#21
the front's actually don't line up perfectly.(on the body at least) the holes on the tower are a mm or 2 off from the 2.0's therefor the pre cut body holes in the stock 2.0T body are slightly off using the 1.0 holes with 2.0 mounts.
#23
dint know there was a right or wrong, i use what works for me, and according to the differnt tracks i run, ran 2 weeks ago at nitro rising race a took third, so i dont feel i did to bad, or with 0 offsets, do you think i would have took 1st or 2nd....lol, also 1st-2nd-3rd place where all losi 1.0.....lmao
proper offset will do wonder's for the handling of the vehicle......denying yourself of that is a real shame and your attitude doesn't help either....were only trying to help here.
you need 1/2" offset rims OR 1/2" extender's then you can run zero off but with the stock hexes you are supposed to run 1/2" offset.
#25
Tech Master
iTrader: (18)
proper offset will do wonder's for the handling of the vehicle......denying yourself of that is a real shame and your attitude doesn't help either....were only trying to help here.
you need 1/2" offset rims OR 1/2" extender's then you can run zero off but with the stock hexes you are supposed to run 1/2" offset.
you need 1/2" offset rims OR 1/2" extender's then you can run zero off but with the stock hexes you are supposed to run 1/2" offset.
#27
Suspended
iTrader: (202)
proper offset will do wonder's for the handling of the vehicle......denying yourself of that is a real shame and your attitude doesn't help either....were only trying to help here.
you need 1/2" offset rims OR 1/2" extender's then you can run zero off but with the stock hexes you are supposed to run 1/2" offset.
you need 1/2" offset rims OR 1/2" extender's then you can run zero off but with the stock hexes you are supposed to run 1/2" offset.
#28