Ask Aaron Waldron
#2911
Tech Adept
I don't even want to know!
Thread's gone a bit off topic Sorry about that.
Thread's gone a bit off topic Sorry about that.
#2912
Haha, it's fine. I see no problem with it.
Ran my AD2 and 8IGHT at ARC a bunch today...man, both of those cars are so much fun to drive.
Ran my AD2 and 8IGHT at ARC a bunch today...man, both of those cars are so much fun to drive.
#2914
Tech Elite
iTrader: (32)
I am picking up my xxxcr this weekend. Im going to be running on an indoor track. Tires of choice are usually pink tapers and prescrub fronts. What setup would yall recommend as a starting point. I would need a good balance of high and low speed steering. I will be running mod with this. Any information would be greatly appreciated.
#2915
Jack Smash - Man, I have no idea. I know a lot of resources had been dedicated to the 8IGHT and now they're pushing to get the 8-T done. I haven't heard anything about tires and stuff like that but I'm assuming they're doing the best with the man-power they've got.
lawtonlosi - If Jesse Robbers reads this, I'm sure he can point you to a good setup for an indoor track. If not, you may want to head over to losibk2.com and ask him what he recommends, he's good with that kind of thing.
lawtonlosi - If Jesse Robbers reads this, I'm sure he can point you to a good setup for an indoor track. If not, you may want to head over to losibk2.com and ask him what he recommends, he's good with that kind of thing.
#2916
Whats up Aaron? Missed ya at the RC Pro Finals.\
Dan G
Dan G
#2917
Yeah...I would've enjoyed the race, but it was nice to spend some time at home! I hit up a local race that weekend too.
How ya been?
How ya been?
#2918
Aaron, or anyone... I just picked up the Brushless XXXT RTR. Im going to run an Ace DS1313 servo. Alignment for the servo mounts is not covered in the manual and I'd like to know if you would know how I should mount them. Thx
#2919
Oh man! I don't have any experience with those servos, nor do I know anyone who has, so I really have no idea.
Hopefully someone else out there will know?
Hopefully someone else out there will know?
#2920
Ah well...I'll fiddle. I'm sure I can make this work. Thx though
#2921
Tech Addict
iTrader: (3)
I need help with balance.
Front to back, Side to side.
Front to back seems to come easily. Adjust for traction.
Sunday at the track my MF2 felt pretty good with one exception. When landing the doubles it wanted to go left. Really LEFT. I looked for differences from side to side and could not find anything visible. Are there any areas to check that I may have missed. Is it an assembly issue? I tried pretty hard to see that things are aligned and even. Links, toe, camber, rebuilt shocks, and so on.
How about pre-load from side to side? What's a good way to check that out?
Damn that's alot of questions.
Thanks in advance
Front to back seems to come easily. Adjust for traction.
Sunday at the track my MF2 felt pretty good with one exception. When landing the doubles it wanted to go left. Really LEFT. I looked for differences from side to side and could not find anything visible. Are there any areas to check that I may have missed. Is it an assembly issue? I tried pretty hard to see that things are aligned and even. Links, toe, camber, rebuilt shocks, and so on.
How about pre-load from side to side? What's a good way to check that out?
Damn that's alot of questions.
Thanks in advance
#2922
Tech Rookie
HI AARON,
HAVE YOU RUN THE 8IGHT-T YET, IF SO HOW DOES IT COMPARE TO OTHER TRUGGIES. WHAT DIFF OILS WOULD YOU RECOMEND FOR A TRUGGY ON A SLIK TRACK WITH MEDUIM BITE. THANX
HAVE YOU RUN THE 8IGHT-T YET, IF SO HOW DOES IT COMPARE TO OTHER TRUGGIES. WHAT DIFF OILS WOULD YOU RECOMEND FOR A TRUGGY ON A SLIK TRACK WITH MEDUIM BITE. THANX
#2923
Tech Rookie
is there any way of adapting a battery powerd rc car into a nitro powerd car
#2924
Originally Posted by jgroenhof
Front to back, Side to side.
Front to back seems to come easily. Adjust for traction.
Sunday at the track my MF2 felt pretty good with one exception. When landing the doubles it wanted to go left. Really LEFT. I looked for differences from side to side and could not find anything visible. Are there any areas to check that I may have missed. Is it an assembly issue? I tried pretty hard to see that things are aligned and even. Links, toe, camber, rebuilt shocks, and so on.
How about pre-load from side to side? What's a good way to check that out?
Damn that's alot of questions.
Thanks in advance
Front to back seems to come easily. Adjust for traction.
Sunday at the track my MF2 felt pretty good with one exception. When landing the doubles it wanted to go left. Really LEFT. I looked for differences from side to side and could not find anything visible. Are there any areas to check that I may have missed. Is it an assembly issue? I tried pretty hard to see that things are aligned and even. Links, toe, camber, rebuilt shocks, and so on.
How about pre-load from side to side? What's a good way to check that out?
Damn that's alot of questions.
Thanks in advance