body for x2
#1
body for x2
will a body off x1 buggy fit and look ok on and x2 buggy
#2
Yes; Jammin' actually used the same shell for the X1 and X2 buggies.
HOWEVER; let the front be yourguide and you'll have to adjust the motor cooling hole and rear body mount hole positions.
HOWEVER; let the front be yourguide and you'll have to adjust the motor cooling hole and rear body mount hole positions.
#3
thank you that must be why i cant find a upgrade for an x2
#4
Yeah they didn't change the body molding between the 2.
The engine cutout and rear body hole moved. That's it.
Any "X1" designated body will fit and Ofna/Jammin'/HongNor didn't change the mold.
The early upgrades just had a Sharpie line drawn on the body I think
The engine cutout and rear body hole moved. That's it.
Any "X1" designated body will fit and Ofna/Jammin'/HongNor didn't change the mold.
The early upgrades just had a Sharpie line drawn on the body I think
#5
Tech Elite
iTrader: (7)
your right. i have an X2 buggy and the body "for" the x2 just has sharpie marks on it. the rear hole is moved back like 4 or 5 mm and the engine hole is moved forward and in just a tiny bit. also you have to cut the front nose piece off and drill a hole and screw it threw the front shock tower. i just left that piece off.
#6
the xray body shell will work too on your x2,but you have to change your sideguards to the x2crt's sideguards.