mcion

iTrader: (32)

Got a couple questions regarding the X2 shocks. Are you guys using the short shockends or the long ones. And also how many mm or rod is showing between the shock body and the shock end when fully extended on front and back in mm please. The reason I ask about the rod is because the front calls for 27mm per the manual, but the site below says 32mm. Thanks. BTW cant post URL's yet so please add www to beginning and .html to the end of link

.twf8.ws/new/tech/car/hongnor/x2crb/x2crbbuild/x2crb-part9.

smb17

iTrader: (17)

When I had jammin i used the short ones all the way around. Screwed all the way on and just checked lengths. They were pretty close for me. Hope this helps. Make sure you don't go too far it can clamp down or even break through to the ball end.

looper

iTrader: (19)

If you are using the same ones all around then use the short for buggy and the long for truggy.

mcion

iTrader: (32)

What about rod length. Do you guys do 37.5mm rear and 27mm front as per manual?