Need help indentifying sleeve
#2
cant tell if its taiwan or italian .21,.28 (prob a .21 if it had a go rod)but to me it looks like a Trinity Extech or Sirio CL7B sleeve.
#3
Will it fit in a Go block? If so, probably a Nova of some variety.
#4
The dot under the exhaust tells me a Novarossi and from what I have read the rods from Novarossi are exchangeable with GO.
#6
i honestly dont beleive its in the novarossi family.
here is a sirio and extech sleeve.
sirio
extech
here is a sirio and extech sleeve.
sirio
extech
#8
Good catch Roelof, the dot is a clear Nova indicator. Yeah it looks like the pics of the Sirio but the Sirios don't have the dot.
Measure the rod, if it's the same length as a Nova/Go, it's a Nova. If it's .5mm longer, it's a Sirio.
Measure the rod, if it's the same length as a Nova/Go, it's a Nova. If it's .5mm longer, it's a Sirio.
#9
i have seen novarossi,jp racing and rb sleeves with and without the dimples,some have 1,2 and 3 and some have none.
i believe those dimples have something to do with the production/batch codes as i see no other purpose for them being there.
i am still convinced it is not a novarossi,rb sleeve.
also novarossi use both cnc milled billet and microcasted pistons.
i believe those dimples have something to do with the production/batch codes as i see no other purpose for them being there.
i am still convinced it is not a novarossi,rb sleeve.
also novarossi use both cnc milled billet and microcasted pistons.
#11
Sirio Kanai series...shorter stroke engine..