jonski

iTrader: (380)

I stripped out my steering knuckle on my HYPER ST...does anyone know of any replacements for the ST besides the stock ones. Does the Jammin ones work with the ST? Also, does anyone have any for sale?

Thanks

J_J4006

iTrader: (6)

Get the CNC ones. is a upgrade for the Aluminum and it's strong.
Not sure if jammin ones can fit. maybe some guys can help.

Team_Orange

iTrader: (20)

jammin knuckles dont fit gotta use the hyper 8.5. You can usually get the cnc knuckles for about 40$ on ebay

j_blaze14

iTrader: (34)

st and 8.5 are the same, get either and use a slightly longer screw and more lock tite. the stock screw is a couple threads short, if you hit hard and the screw is 1/2 way out the same could happen, its not a materials flaw.

Team Orange SA

iTrader: (3)

Just get the CNC ones I broke heaps of cast alloy ones then swapped to the CNC ones from the pro kit and raced for over 12 months no brakeages

jonski

iTrader: (380)

Thanks for the info guys...I have a ST pro, so they are the cnc ones.

smittyusmc

iTrader: (2)

How in the world did you break the cnc ones I have been racing hard with mine for 2 1/2 years not a single problem. I think the Kyosho ones work but dont quote me on that.

Genius

The steering knuckles from the hyper7, 8 and 8.5 will fit. If you can still find the OFNA PCR steering knuckles those are also good

smittyusmc

iTrader: (2)

here are the PCR from the hyper 7

http://www.nitrohouse.com/catalog/pr...?cPath=Trinity Products&products_id=9970

jonski

iTrader: (380)

I didn't break it...the lower screw is stripped out. I bought the truck used, so I don't know how it happened.