FIORONI CLUTCH SYSTEMS!!!!!!!
 

I am using an HPI F4.6 engine and i really want to buy a really good clutch system. i was told to use the UE 4 shoe one but not any instock. UE clutch looks like the ofna 4 clutch shoe which i am considering. I had second thoughts since a friend recommended FIORONI or MIP.

Fioroni clutches:
http://www.amainhobbies.com/index.p...8/filter_mfr/48

MIP clutches:
http://www.amainhobbies.com/advance...ds=mip+clutches

ofna 4 shoe clutch system:
http://www3.towerhobbies.com/cgi-bi...?&I=LXNXJ5&P=SM

So which one do you think is the best i can use?

Will the fioroni clutch fit directly on my engine?

M2C clutches are awesome replacment parts are easly located between vendors and M2C. I have a Fioroni Vario but replacement shoes can be expensive.

Give Mitch a call at M2C


803 417-3071

The Fioroni clutches will fit the motor, but more importantly what car is the motor going into? If it is a truck, I would recommend one of the Vario 3 shoe clutches.

its a supermaxx
 

My truck its a Supermaxx

Go with a M2C set-up...you wont regret it.

Any place you may know that sell them?

I have run the Vario for awhile, I like it, the MC2 looks attractive as well, I just have not tried it..Yet.

Amain sales m2c & carolinas r/c. I have the m2c four shoe flywheel with regular hard shoes & .95 springs seems to work real well for me. I cant find the part # for the same thing i have but it came with the regular hard shoes & 4 sets springs.

Save some money and get the same clutch Ryan Lutz is running. Ascendancy RC. There is a reason it is the #1 selling clutch at the moment. If you would like detailed pics go to www.ascendancyrc.com

you can find it at Amain, Stormer, TKO, GS hobby and the Ascendancy Site. Great life on the shoes and will save you a few dollors.

Ascendancy VS. Fioroni Clutces
 

I just had a look on ascendancy clutces and they really look much like fioroni clutches, considering that fioroni have a variety of clutch systems which one do you think would be best for a supermaxx?

Neither....M2C would be the better option. :nod:

Kelles go with the Vario 3 shoe with 2 aluminum and one carbon shoe. Some people have nothing better to do than constantly bash Fioroni products on every forum they can find. Do some research and you will see what I am talking about.
In the end it's your decision and whatever you choose it will hopefully work out just fine. The Vario gives you the adjustment option with the rotating cam. My guess is the number 2 or 3 setting will work best for you. If later on you need all out tire spinning punch, get the optional cam with the 3, 4, and 5settings. The higher the number the more punch.

Garen,

No Bashing here!! Fioroni makes AWSOME products. You can not go wong with a Fioroni or the Ascendancy. Just remeber with a 3 shoe if you change one shoe or 1 spring that shoe may hit before or after the other two. What this does is cause pressure on oneside of the clutch bell more than the other.

This will lead to premature bearing failure.

You really think so? Fioroni ones look really high quility clutches, you really think m2c would be a better option?

I think we posted on the same time and missed ur posts, well both ascend. And fioroni look high quality, what do you think about fioroni PENTA 7075? it says that it's for 1/8 offroad trucks and rally games?