MKS SERVO'S FOR BUGGY AND TRUGGY
1 Attachment(s)
MKS DIGITAL 29KG SERVO WITH CNC ALUMINUM CASE.
Operating Voltage: 4.8V/6.0V Operating Temperature Range: -10 to +60 Degree C Operating Speed : (4.8V): 0.1sec / (6.0V):0.08sec Stall Torque : (4.8V) : 23.2kg-cm / (6.0V) : 28.9kg-cm Motor Type: Coreless Motor Potentiometer Drive: Indirect Drive Bearing Type: Dual Ball Bearings Gear Type: Titanium Gears Case : Aluminum-magnesium alloy shell Connector Wire Length: 15cm Weight: 2.65 oz. (75g) Wire Length: 15cm Dimensions: 40 × 20 × 41 mm These high quality servo's are the same as the very expensive Jr servo's but half the price. This servo is exclusive to cobra r/c if anyone needs anymore infomation please send us an email [email protected] |
double post :p
|
whats the torque in oz?
also, are they capable of running at 7.4v? |
Originally Posted by fatdaddy
(Post 6522962)
whats the torque in oz?
also, are they capable of running at 7.4v? no they dont work with 7.4volt the normal 6.0volts but you can upgrade to the lifep04 battery which are better than lipo. most you see now who advertise 7.4volt ready and are under 45mm in case height you will see will burn sooner or later we see it now with these ace Hv 's dont believe everything you hear . |
Originally Posted by COBRARACING
(Post 6524376)
1022.83 oz
no they dont work with 7.4volt the normal 6.0volts but you can upgrade to the lifep04 battery which are better than lipo. most you see now who advertise 7.4volt ready and are under 45mm in case height you will see will burn sooner or later we see it now with these ace Hv 's dont believe everything you hear . Ohh yea I almost forgot 1000+ oz of torque are you kidding that cant be accurate. |
29KG-cm is 403 ounces my friend....not 1000+ lol
|
Originally Posted by jzemaxx
(Post 6524726)
29KG-cm is 403 ounces my friend....not 1000+ lol
|
Originally Posted by Frank L
(Post 6525117)
That sounds more believable. I know the whole metric/ sae thing is hard, but it is simple math.
|
Originally Posted by Frank L
(Post 6524636)
Safer than lipo ya ok but defiantly not better. How can you go better than lipo. If you dont want to spend the cash on the fancy high voltage servos then dont, just run a regulator. No way LiFe is better than lipo. Thats funny hahahaha. And Ace has never built a quality servo, they dump fast and their warranty ohh yea what warranty. Invest in a quality JR or Hitec servo and stop worrying. If these Cobra servos are the same as JR then why cant they handle 7.4 volts??? and I bet they have a warranty like Ace. You can try the imitation but it wont taste as good as the real stuff. Im still chuckling about the better than lipo. Thats a good one.
Ohh yea I almost forgot 1000+ oz of torque are you kidding that cant be accurate. |
I got a couple of questions.
Can those numbers be right? 400in/oz at .08 sec that is insane at 6 volts. I know you said half the price of JR but what are we looking at for a set of 2 servos sent to the states? Are these power hungry servos? Seems like it would have to be a huge motor in there for those numbers. Does this company make any other available servos other then the bls950 I just saw on another post you put up and how much is this servo? |
looks like they do..
not sure whre you would use it but.. here you go.. 8.4v to 12v servos'... hahaha http://www.mks-servo.com.tw/servo-02.htm |
Let me know when you get them if the price is cheap I will get 1.
|
Wow you guys sure do over-rate your servos, especially the HV 380.
I really need to see a video of that thing to believe the speed. .03seconds:rolleyes: |
Taiwanese that explains it all. Why didnt you just say so. Now I understand. I will avoid these like the plague. :cool:
|
Originally Posted by Frank L
(Post 6529282)
Taiwanese that explains it all. Why didnt you just say so. Now I understand. I will avoid these like the plague. :cool:
Anyway they clearly are impressive figures so it will be nice to see how they work and last. I think theres is already a disti in US for these so you don't need to order overseas |
All times are GMT -7. It is currently 05:11 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.