Servo?
 

Ok I run two airtronics servos in my xb808 ,94359 in front and 94358 for the brakes,But I have a mbx5t on the way to me and need servos for it to. Here is a list of extra servos I have layin around: futaba s9451,s9350 and a hitec 5998TG. So my ? is which servos would you run in the buggy and wich ones for the truggy? Thanks in advance.

Heres what you got:

s9451
• Speed: .11 Sec/60 Degrees @ 6V
• Torque: 127.8 oz-in @ 6V

s9350
• Speed: .12 Sec/60 Degrees @ 6.0V
• 139 oz-in @ 6V - 10.0 kg-cm @ 6V)

5998TG
• Speed (6.0V): 0.19sec/60°
• (6.0V): 249.96oz/in.

I would use the 5998 on the steering and 9451 on the throttle. The 9350 is almost the same as the 9451 so it does not really matter. But thats what it looks like to me.

Id use the 9451 on throttle and 9350 on steering.

I use a JR 9100T for steering and a 9000s for throttle on my XRay Truggy. No complaints at all. The JR9100t is an AWESOME servo in my opinion. There have been a few up here for cheap money lately as well....

Given the list you provided this is what *I* would do, but others will have other opinions as well:

Truggy
Steering: 94358 (or 5998TG it's slower but stronger so try them both)
Throttle: s9350 (a tad stronger for braking on the Truggy)

Buggy
Steering: s9451
Throttle: 94359

Let me know when you get the Truggy in man.....and I want updated pics when you're done with it ;-)

Will do moto. I traded that xxxnt for and brand new bce chassie for the 5t and a brand new rb 2020 pipe set!!

Thanks for all the input guys. I im gonna leave the buggy the way it is with the airtronics in it since im already use to it. And use the one of the futabas and the hitec on the truggy.

BCE Chassis is nice ;-)