ready rollers

I forgot to put I am running the ebmod 2041 pipe and I put the extra shim in it. Also I am running 30% fuel, and a little rich still still. getting 8 1/2 and I wanted to make sure I am on the right track. Or should I take the extra shim out?

Racecrafter

iTrader: (25)

I've run them with all the different gasket configurations and like the stock shimming right out of the box the best. (Shim with .1 & .2 gaskets) with the EB 2041 pipe.

I also ran the 0801 which we should have in stock soon. It was with the same shim/gasket config and was really good. Though I didn't get to race with it.

ready rollers

Thank you for the info. Please post when you get that pipe in stock.

RC Pro 1

They pipe is coming from RC Pro Products.

Racecrafter

iTrader: (25)

They give you a time frame Carlton?

Racecrafter

iTrader: (25)

I have in my hands an Alpha s852 (the orange head 5+2)

So far it has been broke in and awaits testing this week.

Report coming shortly thereafter.

rcejk

iTrader: (20)

Jimmy, sent you the email with the pics of the piston. i just ordered up the new orion 2013 pipe and will test it out Wednesday i believe. i will let you know if that helps improve the run times. if anything maybe i could send it out to you to inspect and i can get you some fuel to use. lmk!

Thanks Ethan

Racecrafter

iTrader: (25)

Ethan,

Got the email. I'll be getting back to you today. We've been super busy in the shop which is a good thing

Racecrafter

iTrader: (25)

Ethan,

Email sent

shano83

iTrader: (8)

just wondering if u guys would recommend running in on normal race fuel or runin fuel on a brand new alpha (green head one)

Racecrafter

iTrader: (25)

We break in our engines with the fuel we will run/race with.

If you run 20-25% break it in with the shims that are already in the engine.

If you run 30%, we install the extra gasket that comes with the engine to ease the compression a bit and then remove it once we install it into the buggy to run.

Racecrafter

iTrader: (25)

Short report on the new Alpha S852 (Orange head .21)

Break in went well. (Same as others)

Went out last night and put some laps on a still tight engine. No doubt this engine is smoother and makes more torque!

Looking forward to putting it to the test on Saturday at the Toys for Tots race at Thunder Alley!!

More to come on fuel mileage, tuning, temps etc.

rcejk

iTrader: (20)

cant wait to hear more about it!!

Alan D.

Can't wait to see the motors out at Thunder Alley guys.

Racecrafter

iTrader: (25)

Come by the Track Star Pit and we will be glad to show you the Alpha Plus engine line.

We are proud to be accomodating;

Ryan Lutz

Paul Coleman

Dani Choi

Pres Ilog

Danny Flores

Chris Vierra

and Myself

this weekend at the Toys for Tots race!