OS V-Spec II World Edition or Mugen Ninja JX21???
#31
hey guys, how does the JP FX21 B5 stand up to these? Its in the higher price range
#32
Joe I agree 100% you are a very lucky guy and must be pretty talented too with a name like mugen behind you. Good job keep up the good work. On the ninja/ speed issue - I'm just messing with you. You helped me out when I started running a speed with the pipe and eb mods head button. Thanks again Joe you took the time to help a fellow RC er and that goes along way on my book.
#33
I don't see how money could be a issue when a ninja is almost 350 and a al speed is 400$ If i was going to get the speed i would get the 400$ one. But i have decieded on the ninja because of the porting and case design. Now if someone would hurry up and get it in stock already!!!! Cause when i get my engine in about 10 days if there is no ninjas in stock i will have to settle for the speed
#34
Tech Initiate
Thread Starter
thanks everyone for all your suggestions...i think i've decided to buy OS speed vspec II
#36
#37
Are the pistons the same part between the OS and Ninja?
#38
Tech Initiate
Probably no. Part number is different but cannot be sure.
Anyone ? if it's the same.......probably................can save lots of $$$
Anyone ? if it's the same.......probably................can save lots of $$$
#39
#41
The desicion between the speed and ninja is simple, is it for a buggy or truggy. Buggy, I run speeds all day long and love them. Truggy, I run ninjas, or my new favorite truggy motor = A speed with a 5 port ninja piston/sleeve. Speed just does not have enough snap on bottom for me for a truggy. The ninja has much more snap than the speed, to much though for a buggy.
#42
The desicion between the speed and ninja is simple, is it for a buggy or truggy. Buggy, I run speeds all day long and love them. Truggy, I run ninjas, or my new favorite truggy motor = A speed with a 5 port ninja piston/sleeve. Speed just does not have enough snap on bottom for me for a truggy. The ninja has much more snap than the speed, to much though for a buggy.
Last edited by lalmog91; 08-02-2009 at 03:46 PM. Reason: adding information
#43
yea, On my ninja in my truggy I can run 1.0 clutch springs and it works great (First motor I have ran in a truggy and not uses 1.1 or 1.2 springs). If you put 1.1 or 1.2 springs on the speed it does ok in truggy, but temps seemed to run a little hotter and mileage was not near as good as the ninja.
#44
Tech Master
iTrader: (12)
The thing people don't seem to be taking into consideration is that the OS SPEED is a modded engine, whereas the Ninja is a stocker.
OS SPEED: about $400-420.00
NINJA: about $300-315.00
If I had to choose between them both, I would have gotten the ninja, and with the $$ I saved, I'd get it custom modded.
OS SPEED: about $400-420.00
NINJA: about $300-315.00
If I had to choose between them both, I would have gotten the ninja, and with the $$ I saved, I'd get it custom modded.
#45
The thing people don't seem to be taking into consideration is that the OS SPEED is a modded engine, whereas the Ninja is a stocker.
OS SPEED: about $400-420.00
NINJA: about $300-315.00
If I had to choose between them both, I would have gotten the ninja, and with the $$ I saved, I'd get it custom modded.
OS SPEED: about $400-420.00
NINJA: about $300-315.00
If I had to choose between them both, I would have gotten the ninja, and with the $$ I saved, I'd get it custom modded.
Please explain you theory behind this comment..