Ace servo help!
07-05-2009, 12:35 AM
#1
Ace servo help!
Hello all, i have an ace 1015 servo on my 8 for sterring, and have bought
w ww.amainhobbies.com/product_info.php/products_id/19312/n/Mugen-Aluminum-Servo-Horn-Set
i had the Futuba spacer on (as it was the only one that would fit) but have stripped it within 30 mins, can anybody help me with which brand should fit snugly on ace servos? Thanks.
w ww.amainhobbies.com/product_info.php/products_id/19312/n/Mugen-Aluminum-Servo-Horn-Set
i had the Futuba spacer on (as it was the only one that would fit) but have stripped it within 30 mins, can anybody help me with which brand should fit snugly on ace servos? Thanks.
07-05-2009, 12:57 AM
#2
mate id get one of these http://www.amainhobbies.com/product_...ervo-Horn-Blue
they are nice and chunky and with the two lock screws hold on tight to the servo and shouldn't strip out on you.
the mugen one you got honestly isnt that good, the plastic inserts just arnt up to off road racing.
also double check your end points, cause if your wheels are turing too far this will cause the servo horn strip out, even the plastic inserts should have lasted 30min
they are nice and chunky and with the two lock screws hold on tight to the servo and shouldn't strip out on you.
the mugen one you got honestly isnt that good, the plastic inserts just arnt up to off road racing.
also double check your end points, cause if your wheels are turing too far this will cause the servo horn strip out, even the plastic inserts should have lasted 30min
07-05-2009, 01:21 AM
#3
Hello all, i have an ace 1015 servo on my 8 for sterring, and have bought
w ww.amainhobbies.com/product_info.php/products_id/19312/n/Mugen-Aluminum-Servo-Horn-Set
i had the Futuba spacer on (as it was the only one that would fit) but have stripped it within 30 mins, can anybody help me with which brand should fit snugly on ace servos? Thanks.
w ww.amainhobbies.com/product_info.php/products_id/19312/n/Mugen-Aluminum-Servo-Horn-Set
i had the Futuba spacer on (as it was the only one that would fit) but have stripped it within 30 mins, can anybody help me with which brand should fit snugly on ace servos? Thanks.
http://www.amainhobbies.com/product_...ervo-Horn-Blue
07-05-2009, 01:48 AM
#4
why dont you run the stock ACE servo horn that came with the servo
I have been using the ACE horn for over a year now on my 8T truggy and it still holds strong
ACE servos have a smaller spline than the standard 23 spline. the only horn that fits perfect is the ACE horn
use them. they are bullet proof
I have been using the ACE horn for over a year now on my 8T truggy and it still holds strong
ACE servos have a smaller spline than the standard 23 spline. the only horn that fits perfect is the ACE horn
use them. they are bullet proof
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
