Armaan

iTrader: (49)

Options are aplenty, but info is not. I've "narrowed" it down to 8 options:

Associated FT: http://67.199.85.166/main/productdetails.php?text=89175

Losi RE11: http://www.losi.com/Products/Feature...rodId=LOSR8001

Dynamite 053: http://www.horizonhobby.com/Products...rodID=DYNP5003

Dynamite 086: http://www.horizonhobby.com/Products...rodID=DYNP5005

Dynamite 007: http://www.horizonhobby.com/Products...rodID=DYNP5001

OFNA JP2: http://www3.towerhobbies.com/cgi-bin...P?I=LXMWE6&P=8

OFNA JP3: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNNE3

OFNA JP4: http://www3.towerhobbies.com/cgi-bin...&I=LXTEB8&P=ML

Scottmisfits

iTrader: (7)

Either the Losi RE11 or the AE 2035. I've used them both. The RE11 is a little smoother but the 2035 gives a bit more power.

cary

iTrader: (67)

the AE 2035 works ok but the o.s. 2050 or 2060 are the best
I have the 2060 on a Pro Twister Mod v-spec and it screams

JAMMINKRAZY

iTrader: (17)

OS 2060 would be the best. Followed by the 2050 or RE11 (same thing, I personally use the RE11). The 053 is also a very good option. AE pipe is good as is the JP-3. Theres some options for you. Take your pick.

Jaz240

iTrader: (52)

I have the RE-11 and the JP-3

Re-11 has a bit smoother powerband with a tad more low end and much better run times

JP-3 has a good enough low end, a better mid and a screaming top, with 2-4 minutes less runtime

Frank L

iTrader: (148)

OS 2060 (Mugen 2042 same pipe) OS 2050 (Losi RE11 same pipe). The 2060 will give you more top end the 2050 will cut the top end off a little bit. I have also been told that the JP3 works great too. Personally I would go with the OS 2060 or Mugen 2042 with the 2060 header or Mugen L shaped header. I have the Mugen 2042 with a L shaped header on an OS speed and I love it. I didn't like the 086 and the 053 pipe did ok it just was a little less responsive and cut the top end off. 053 and a long header was worse than the 053 and a med header or short header. Bottom line is 2060 is the best and 2050 is a good 2nd choice.

devilchrist

iTrader: (32)

I have the RE10 on magnesium head speed and I like it. it has less top end i think than jp3 i think, but ton of bottome and very smooth.

I really don't like the cheap look of 2060 and played out chrome and that's why opted for the RE10.

Frank L

iTrader: (148)

Get some mothers alum polish and buff away. The pipe will shine like new and you will love the chrome finish like you did when it was new.

imaxx21

iTrader: (1)

you "narrowed" it down and left out the 2 best pipes...

2050 for truggy, 2060 for buggy

ezveedub

iTrader: (17)

The OS 2060/Ninja 2042 or EB Mods/Mielke 2041 are the best pipes to use.

Armaan

iTrader: (49)

Holy sh!t, thanks for all the responses. I think I found a new homepage.

Anyhow, the reason I didn't list the OS pipes was because they are out of my budget (over $100). I only want to spend $60 on a pipe, and maybe $80 if [the] pipe is that much better.

I didn't know the Associated pipe was so good (mentioned in the same breath has the "re-badged" RE11 (OS 2050) and cult-favorite JP-3.

Thanks again for all the responses, I really do appreciate it!

rangerjkb

iTrader: (45)

Definitely the OS2060, a little more pricey, but it's worth it in performance and the long run.
JB

Racecrafter

iTrader: (25)

EB Mods 2041 = best performance/mileage pipe available for the V-Spec

Smooth delivery like a 2060 but with the power of a 2050

Broader torque than a 2035 and longer revs like a 2013.

You can set you clutch heavier (.95 spring + high bite shoe) to smooth it out even more.

(Clutches last longer as do the bearings from reduced slip/ heat)

It's almost like driving an electric buggy.

bphil49

iTrader: (28)

Which sounds the best? I have a O.S 2050 but I can't hear it on the track.

ezveedub

iTrader: (17)

The 2041 has the sound. The O.S. pipes are quiet.