airtronics fhss-2 2.4ghz failsafe
#1
airtronics fhss-2 2.4ghz failsafe
Does it have a failsafe (i have a m11)? If so how do you set it up?
#2
does it have one?
#3
no
#4
yup!
have both radio and car on.
hold throttle at position that you want the failsafe to go to.
hold the bind button on receiver for 4 seconds. LED will flash slow.
let the throttle go after the LED starts to flash fast, and then let go of the bind button.
bingo!!! failsafe set!!
have both radio and car on.
hold throttle at position that you want the failsafe to go to.
hold the bind button on receiver for 4 seconds. LED will flash slow.
let the throttle go after the LED starts to flash fast, and then let go of the bind button.
bingo!!! failsafe set!!
Last edited by jrwoodchuck; 06-17-2009 at 08:01 PM.
#5
he'll mess that up...
#6
thanx chuck. screw off max
#7
Didnt yours come with a manual?
#8
yup!
have both radio and car on.
hold throttle at position that you want the failsafe to go to.
hold the bind button on receiver for 4 seconds. LED will flash slow.
let the throttle go after the LED starts to flash fast, and then let go of the bind button.
bingo!!! failsafe set!!
have both radio and car on.
hold throttle at position that you want the failsafe to go to.
hold the bind button on receiver for 4 seconds. LED will flash slow.
let the throttle go after the LED starts to flash fast, and then let go of the bind button.
bingo!!! failsafe set!!