smb17

iTrader: (17)

agree!

crosten

does the jammin uses a c hub or pillow ball suspension ?

sugs

iTrader: (4)

C hub.

rallyebmx

iTrader: (21)

But pillow ball is offered as an option. part # OFN40624

smb17

iTrader: (17)

NsideLine, If you need 1.35 shock pistons just let me know and I'll bring my metric drill set and you can go threw some of your pistons if you'd like. I just re read your post from way back. Haha Just thought I'd offer. If you need them just let me know when the next time you're out at rev.

Fletcher6371

Last weekend at the RC Pro Midwest race i broke 2 front suspension arms on my Jammin' at different times. broke them at the inner hinge pin. (there were massive jumps and EVERYONE was breaking). Has anyone had any problems with the front arms breaking at the inner hinge pin. I just found it odd. Heard about boiling the arms but idk.

ON A MISSION

iTrader: (34)

Hey guys i have a converted x2 i am trying to move ,any trades or ? lmk send me a pm,thanks. I only had a problem like you said on a really bad crash or something that expected a breakage ,that was my fault ,never boiled them.

Creepin

Could someone tell me what would be a pretty close amount of turns for my on my servo saver for my x1 jammin?? Im bangin my head against the wall not to over do it.The servo saver is really up setting me. I have tighten the saver at least 5turns and do not want to over do it.

bigmatt

iTrader: (16)

I think I have mine set even,[the adjuster] with the mount.. 3 turns? I will try to find it in my manual. Yes it is set even with the top of the mounting post. Inside the you should see the ring lip. Thats where mine sets. Then you add the bearing and it should be flush with the collar.

Manufacturercup

i run mine with 2mm of threads showing on the "new" style servo saver (one with the nut on top)

joehundy

iTrader: (15)

i run mine all the way tight lol on my X2 and havent had any probs

sonyb

iTrader: (1)

I run mine by the book......see my X2 in action

GarageJ

We have been using X2 CRT stoneguards in our buggy for this season.
Makes the car a lot narrower.
Just cut down the front piece of the guards to fit buggy bodies and make few new holes to mount them.

Check the attachments.

On one of the pics is original VS. modified.


We also used the CRT.5 radio box. This needs an adapter to be made to mount it to radio tray. Just a little more work.


One more secret
We made our own link type front end. After the testing it made the car turn more smoother and really improved the handling over bumbs.


Our car weights around 3200 grams, race ready. We managed to drop the weight by milling the chassi, new front upper link, smaller radio box, narrowing the chassis and using narrower 808 body etc.

Landscaper

iTrader: (4)

Looks good how has the durability ben on the front end setup? Any more pics of the car? Thanks for the tips

jeremiah23

iTrader: (1)

how does the x2 handles compare to the x1x?the only thing i like bout the x2 are the shock towers