slayer problem !!!!need help!!!!
#1
slayer problem !!!!need help!!!!
well i was running my 3.3 slayer and it shut off the engine spins new spark plug but no start. it also pulls away when im starting it. like the clutch is stock or something. this is my firs rc car so dont know a lot about them. this is frustraiting today sunday and no toy......
#2
inspect your clutch and bearings sounds like its locked up, if it is it will stall whenn you hit the brakes
#4
It's probably hydro locked, the TRX 3.3 engine automatically locked itself when fuel is flooding inside...when this happen...take off your glow plug...cover the head with clean rag...and crank the engine with the EZ start until there is no fuel spitting...reinstall the plug then start the engine....good luck...btw visit traxxas website, go to their knowledge base section...I learned a lot of stuff there to tame my 3.3 maxx...also join their online community...lot of nice and helpful people there...
#5
#6
It's probably hydro locked, the TRX 3.3 engine automatically locked itself when fuel is flooding inside...when this happen...take off your glow plug...cover the head with clean rag...and crank the engine with the EZ start until there is no fuel spitting...reinstall the plug then start the engine....good luck...btw visit traxxas website, go to their knowledge base section...I learned a lot of stuff there to tame my 3.3 maxx...also join their online community...lot of nice and helpful people there...
+1...happend to me