Need some help with our Orion Wasp .28
#1
Need some help with our Orion Wasp .28
My son and I recently finished breaking in an Orion .28 Wasp in our Muggy. once we finished breaking it in according to the user's manual we leaned out the high speed needle some and had it running about 225 and doing fine,we finished off a tank and ran out of daylight. I figured we could finish off later. A couple of days later we fired it up and once it started it would die as soon as the igniter came off of the glow plug. We put a new glow plug in, it fired up, ran for about 30 seconds and started doing the same thing. The first plug was a little weak but the new one still glows fine, it just won't stay running when we pull the igniter off. We haven't made any adjustments since it was running fine so now we're we're stumped. Any information would be appreciated.