jr 9100s servo
#1
jr 9100s servo
hey guys i understand i may be posting in the wrong area before i get yelled at im sorry but anyways my problem is this,i have a jr 9100s servo that is giving me major headaches,ive had it hooked up to 2 diffrent recivers,2 diffrent radios,everything is charged up and the servo sits there and flutters the wheels back and forth in neutral position,it turns right and left great but at a stand still it flutters back and forth my guess is the servo has issues,i have written an email to jr but still waiting for a response,has anyone had this same problem and if so whats the cost to repair it,thanks for any help guys
#4
Tech Elite
iTrader: (17)
hey guys i understand i may be posting in the wrong area before i get yelled at im sorry but anyways my problem is this,i have a jr 9100s servo that is giving me major headaches,ive had it hooked up to 2 diffrent recivers,2 diffrent radios,everything is charged up and the servo sits there and flutters the wheels back and forth in neutral position,it turns right and left great but at a stand still it flutters back and forth my guess is the servo has issues,i have written an email to jr but still waiting for a response,has anyone had this same problem and if so whats the cost to repair it,thanks for any help guys
#7
i'm using the same servo on both throttle and steering. if you are using a spectrum radio, make sure the frame rate is at 5.5. also i bet the fluttering will stop once the car is sitting on the ground. plus what servo horn are you using? is this in a buggy?
#8
Tech Master
iTrader: (1)
I Call it the "JR Death Rattle" Have had about six do this, My Brother has has a few as well, One person was talking about a broken internal part, Not sure, But I know that when this happens, it will burn up sooner or later, one week, one month, two months, then, poof* warrenty...
#10
monteman1970,
The inside of the case is broken, that is why it can't find center, send it back to Horizon and they will take care of it for you.
Ralph Walters
Team JR
The inside of the case is broken, that is why it can't find center, send it back to Horizon and they will take care of it for you.
Ralph Walters
Team JR
#12
#15
i've had this same problem that you are describing on my giant scale airplanes when i used digital servos that didn't have enough torque.