mic71

hi im new to nitro and have just built my first buggy the hot bodies d8 im going through the set up sheet and it tells me that my front shocks should be 95mm and the rear 97mm can anybody help me and tell me how to adjust the length please. thanks

malik

iTrader: (19)

Go to the D8 thread "New Hot Bodies Buggy" I pm'd you with some help on your question.

slumlord

iTrader: (10)

It's the mounting position on the shock tower. 97 mm for the front is the most outer hole on the tower and the inner one on the lower arm. 98mm on the rear is the middle hole on the tower and the inner on the lower arm.

mic71

thanks for the advice guys

Kaotic Racer

iTrader: (2)

Its your Droop setting. measure from the top center shock bolt to the bottom center shock bolt. Adjust your droop to front 97 rear 99-100.