Siim Engines!!!!
1 Attachment(s)
CB Concepts is pleased to announce that we will be the exclusive importers of Siim Engines.
|
2 Attachment(s)
A couple of pics of the engines.
|
If those are Novarossi based engines, I'm sure it will be a winner.
|
1 Attachment(s)
Anyone want to guess who manufactures the engines?? :D
|
Colin,
Please send me some details... |
Originally Posted by fast11970
(Post 5344023)
Colin,
Please send me some details... |
Originally Posted by C Branch
(Post 5344014)
Anyone want to guess who manufactures the engines?? :D
Uh... Hasbro? Post some internal pics, and of the case. |
Colin PM
|
4 Attachment(s)
Internal pictures.
|
Im digging the filled crank, and the Nova logo on everything...not a big fan of cast aluminum crankcases though, they break/crack too easy..
5 Ports? |
motor
Colin, can you PM me with the price, I know it's going to be high it looks like Nova's best internals.
|
Originally Posted by Jaz240
(Post 5345233)
Im digging the filled crank, and the Nova logo on everything...not a big fan of cast aluminum crankcases though, they break/crack too easy..
5 Ports? The case is the same as Nova's cases, there will be no issues with it. In fact, every single engine made has a cast case. ;) |
I have been running the 9901 on mine, and I will test a 053 tomorrow.
The 9901 is nice and smooth and is a very good all around pipe for this mill. I can't see the 053 being any better, but I have been told that it is even better than the 9901. I will report back tomorrow about the pipes. |
Give us some run times also...
There are different types of cast aluminum...the pocked textured ones like the one SIIM uses, seems to be bad luck for me, (mounting tabs crack) as appossed to the smother higher density ones like OS uses |
Originally Posted by Jaz240
(Post 5345516)
Give us some run times also...
There are different types of cast aluminum...the pocked textured ones like the one SIIM uses, seems to be bad luck for me, (mounting tabs crack) as appossed to the smother higher density ones like OS uses I have never seen a Nova Rossi break it's case, OS on the other hand.....;) |
Looks like a Plus 21-5K with filled crank. I was hoping for a 3 port.
|
Originally Posted by ezveedub
(Post 5345569)
Looks like a Plus 21-5K with filled crank. I was hoping for a 3 port.
No 3 port........yet. :D |
how much are these
|
Originally Posted by C Branch
(Post 5345531)
We have been getting 9.5-10 minutes on ours with a JP-3 and a 9901 pipe. I am going to try a 053 tomorrow as they are supposed to be even better.
I have never seen a Nova Rossi break it's case, OS on the other hand.....;) |
Originally Posted by yeaklet4
(Post 5345704)
how much are these
|
Originally Posted by Jaz240
(Post 5345730)
You are getting the same run times with the JP-3 fuel hog pipe as you are with the 9901?:weird:
|
Originally Posted by yeaklet4
(Post 5345704)
how much are these
Colin |
|
Originally Posted by 8&stuff
(Post 5345934)
|
sweet:nod:
|
Great price on this mill, very fast, Colin, let me know the results you get from the 9901, do you have a 9853, it would be nice with it.
|
Originally Posted by mugenb46
(Post 5346017)
Great price on this mill, very fast, Colin, let me know the results you get from the 9901, do you have a 9853, it would be nice with it.
|
siim
You can get siim in the USA
|
Well, I just got back from a day testing/practicing and the results are impressive!!
I had been running a 9901 on the engine and the best run time I had gotten was 10:20. I switched to a 053 and run time went up to 11:45. Temps were 230 when it finally ran out of fuel. It actually felt a little rich on the bottom, so there may be even more in it. :) |
How was the performance with the 053 compared to the 9901?
were you running at hobbytown? |
Originally Posted by Jaz240
(Post 5351558)
How was the performance with the 053 compared to the 9901?
were you running at hobbytown? I feel like the 053 had more power through the whole powerband. It was very linear like the 9901, but it was faster from bottom to top. I will be sticking with the 053 from now on!! :nod: |
Colin Very interesting can you send me an Email [email protected]
Would love to see a 3 port with the same novarossi's best approach as well. |
Email sent.
|
Race Day tomorrow!!!! :D
|
Only a handful of these high end engines left at this special price!! Hurry and get one now while you still can before the price goes up!!! :D
|
|
Hey collin you got a motor I can "demo" for the nitro challenge ;)
|
Originally Posted by moparsrule
(Post 5445992)
Hey collin you got a motor I can "demo" for the nitro challenge ;)
|
By "demo" he means demolish:D
|
Siim engine and DLD tires TQ and take the win in Expert Buggy in Tucson last night!! :D
|
All times are GMT -7. It is currently 10:14 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.