Losi Eight to Corr conversion
01-23-2009, 06:54 AM
#17
01-23-2009, 08:57 PM
#18
Ok guys I dug through the trash and found all the parts packages. This is basically what I uses to convert a Losi 8 to a CORR type truck.
Losi
1-8T chasis
1-8T front and rear shock towers
1-Rear a arms to get the lower shock mounts( only way the come)
These items were given to me no stock #s
1-LOSA3529 Center rear driveshaft 8T
1-LOSA3528 Center front driveshaft 8T
1-LOSA9159 Fuel Tank 8T
1-LOSA4437 Chassis Guard Set
optional
1-LOSA9155 Quick Change motor Mount (a must)
1-KP-230 Losi 8B/T Radio Tray Stiffener(stops throttle servo damage)
Associated
1-89436 SC8 Rear bumper
1-89434 SC8 Front Bumper/Slid plate
1-89433 SC8 Fornt Bumper Mounts
1-89438 SC8 Rear Bumper Mounts
1-89430 SC8 Mud Flaps
Traxxas
1-4914R Body mounts (Separate the 2 connected ones for the front mounts
I think that is all
Have fun
Rich
Losi
1-8T chasis
1-8T front and rear shock towers
1-Rear a arms to get the lower shock mounts( only way the come)
These items were given to me no stock #s
1-LOSA3529 Center rear driveshaft 8T
1-LOSA3528 Center front driveshaft 8T
1-LOSA9159 Fuel Tank 8T
1-LOSA4437 Chassis Guard Set
optional
1-LOSA9155 Quick Change motor Mount (a must)
1-KP-230 Losi 8B/T Radio Tray Stiffener(stops throttle servo damage)
Associated
1-89436 SC8 Rear bumper
1-89434 SC8 Front Bumper/Slid plate
1-89433 SC8 Fornt Bumper Mounts
1-89438 SC8 Rear Bumper Mounts
1-89430 SC8 Mud Flaps
Traxxas
1-4914R Body mounts (Separate the 2 connected ones for the front mounts
I think that is all
Have fun
Rich
01-25-2009, 02:34 PM
#20
Well I ran my first tank today. Handled pretty good. I need some oil changes I think.
One modification, where the skid plate mounts between chassis and diff case is not going to work. First double I took I nosed onto the front bumper and it pulled out. I cut off the entire part that goes between the chassis, Put on the stock buggy bumper and screwed the skid plate int the buggy bumper. This isn't going anywhere.
[IMG]
[/IMG]
Here is the finished truck.
[IMG]
[/IMG]
One modification, where the skid plate mounts between chassis and diff case is not going to work. First double I took I nosed onto the front bumper and it pulled out. I cut off the entire part that goes between the chassis, Put on the stock buggy bumper and screwed the skid plate int the buggy bumper. This isn't going anywhere.
[IMG]
[/IMG]Here is the finished truck.
[IMG]
[/IMG]
01-25-2009, 03:25 PM
#22
01-25-2009, 03:50 PM
#25
Ok guys I dug through the trash and found all the parts packages. This is basically what I uses to convert a Losi 8 to a CORR type truck.
Losi
1-8T chasis
1-8T front and rear shock towers
1-Rear a arms to get the lower shock mounts( only way the come)
These items were given to me no stock #s
1-LOSA3529 Center rear driveshaft 8T
1-LOSA3528 Center front driveshaft 8T
1-LOSA9159 Fuel Tank 8T
1-LOSA4437 Chassis Guard Set
optional
1-LOSA9155 Quick Change motor Mount (a must)
1-KP-230 Losi 8B/T Radio Tray Stiffener(stops throttle servo damage)
Associated
1-89436 SC8 Rear bumper
1-89434 SC8 Front Bumper/Slid plate
1-89433 SC8 Fornt Bumper Mounts
1-89438 SC8 Rear Bumper Mounts
1-89430 SC8 Mud Flaps
Traxxas
1-4914R Body mounts (Separate the 2 connected ones for the front mounts
I think that is all
Have fun
Rich
Losi
1-8T chasis
1-8T front and rear shock towers
1-Rear a arms to get the lower shock mounts( only way the come)
These items were given to me no stock #s
1-LOSA3529 Center rear driveshaft 8T
1-LOSA3528 Center front driveshaft 8T
1-LOSA9159 Fuel Tank 8T
1-LOSA4437 Chassis Guard Set
optional
1-LOSA9155 Quick Change motor Mount (a must)
1-KP-230 Losi 8B/T Radio Tray Stiffener(stops throttle servo damage)
Associated
1-89436 SC8 Rear bumper
1-89434 SC8 Front Bumper/Slid plate
1-89433 SC8 Fornt Bumper Mounts
1-89438 SC8 Rear Bumper Mounts
1-89430 SC8 Mud Flaps
Traxxas
1-4914R Body mounts (Separate the 2 connected ones for the front mounts
I think that is all
Have fun
Rich
"1-Rear a arms to get the lower shock mounts( only way the come)
These items were given to me no stock #s"
01-25-2009, 04:32 PM
#26
bustedpiecesrc....hes talkin truggy.
01-25-2009, 09:04 PM
#27
Sorry the A-arms are from the 8T truggy. Someone gave me the shock adaptors so I didn't need to buy the part and dont have the part number.
Sorry on the video also. New Years Eve was a little too festive and the next day I washed my good camera in the jeans pocket I was wearing. Total loss.
Sorry on the video also. New Years Eve was a little too festive and the next day I washed my good camera in the jeans pocket I was wearing. Total loss.
01-27-2009, 01:12 PM
#28
Tech Initiate
You should put the SC8 roll cage on it, because I think its the only reason my body on my SC8 has lasted as long has it has.
01-27-2009, 09:14 PM
#29
Nobody here is running the roll cage so I figured I would save the expense. The local dirt oval wants us to come out Friday night and run the oval. I thought that might be cool. They are across from Tampa Stadium and are having a Super Bowl weekend at the track. I thought it might give it some exposure. He has an unused track he used to use for monster truck events and is talking about making a true short course for these and slash trucks.
01-28-2009, 08:58 AM
#30
Tech Initiate
The roll cage is only $36.00, that's pretty cheap considering it save's your body.
Just my 2 cents
Just my 2 cents