8T 2.0

[slayyer]

i like the clear in the back part of it. looks good man!

[mattwoodcraft]

frank that ia awsome mate

[mattwoodcraft]

Originally Posted by jwcobra03

Can someone list the shock springs from hardest to softest.

correct me if im wrong but i think it is

red 2.5
silver2.8
green3.1
black3.4
white3.7
gray4.0
purple4.3

hope that helps

[CaseyP]

standard roller set up with the following changes;

32 oil in the front

Rear
2oz wt in front of the rear pivot

black springs 2.0 swaybar shocks all the way out on the tower std arm location short camber link (2-a) and thats it. thats the full set up.

[mattwoodcraft]

i look forward to trying the set up i ordered a sway set i read that the 2mm sway bar kit comes with this ...

[minit76]

Originally Posted by CaseyP

standard roller set up with the following changes;

32 oil in the front

Rear
2oz wt in front of the rear pivot

black springs 2.0 swaybar shocks all the way out on the tower std arm location short camber link (2-a) and thats it. thats the full set up.

Casey,

Your running black springs on the front and rear of the truggy?

Steve

[fleggasaurus]

Hey Matt

Are you thinking of trying this setup this weekend up at whiteman Park as I've already got a setup i'm trying but would really like to see how Casey's goes.

Cheers
Brendan

[randystang]

has anyone seen the alan burton shock mod?

[Vareck]

Originally Posted by minit76

Casey,

Your running black springs on the front and rear of the truggy?

Steve

Yes Black Springs Front and Back

[mattwoodcraft]

Originally Posted by fleggasaurus

Hey Matt

Are you thinking of trying this setup this weekend up at whiteman Park as I've already got a setup i'm trying but would really like to see how Casey's goes.

Cheers
Brendan

my ste up is relative close the only diffarence is 2mm sway bar set and i run white springs i will put the blacks on to see how it runs

[ABURTON]

Originally Posted by randystang

has anyone seen the alan burton shock mod?

randy it's not my personal shock mod. I got it from Adam Drake or Mike truhe...

I'm just passing it along

What do ya need to know about it?

[SqueegUK]

That body on the previous page looks so awesome, nice job, do like the clear bit on the rear too.

[mattwoodcraft]

what are you doing with the rear shocks on the mod your talking about ?

[TIX]

they drill a hole in the caps and use 2 orings clued together and then to the cap to support the bladder
it allows full rebound.
im yet to try it but i have some old shock caps sitting there that i am going to try it with

[TIX]

Originally Posted by fleggasaurus

Hey Matt

Are you thinking of trying this setup this weekend up at whiteman Park as I've already got a setup i'm trying but would really like to see how Casey's goes.

Cheers
Brendan

fleggasaurus!!! you made it here finally
you ready for the nats?