tinycrites

iTrader: (36)

I got this motor in trade and not sure what RB it is. Any help would be great. It's a standard plug.

JanE

my best guess would be its an RB s5. Although it could be and s7 aswell.

tinycrites

iTrader: (36)

Would it help if I took it apart and took pictures of the sleeve.

MassiveMods

Looks like a 2003 WS C 5

Oodles of top end , bit boggy down low if memory serves me...

BAUSTIN

iTrader: (2)

you can enter the number engraved on the side on rb's site and it will tell you.


here you go......

http://www.rbproducts.com/mainEn.php...ercher=Search+

porkchop

looks like a s3 or s5 to me

Toiffel

iTrader: (52)

+1 porkchop

BAUSTIN

iTrader: (2)

why is that?......it says c5 on the case.....and rb's site shows it as a c5, if the no. on the case is 0310018

mblgjr

iTrader: (86)

This guy has it right. according to the case number.

However; we all know that heatsinks and head buttons can be changed at will; so you probably won't know what it really is until you tear it down.

tinycrites

iTrader: (36)

The number on the case is 0310078. Where do you go to check the number. I' m will take it apart and post pictures of the sleeve in a little bit.

BAUSTIN

iTrader: (2)

here:
http://www.rbproducts.com/mainEn.php...ercher=Search+


acording to that number its CS "sport", more than likely a three or five port as mentioned above. acording to the .pdf on the rb site its a 5 port

JustinD

Looks like a C5 case with a S7 head.

RBMike

All the old S motors have that "C5" molded into the side of the crank case. The number says its a sport 3 port but that head/heatsink could have come off an S3,S5 or S7.

tinycrites

iTrader: (36)

Here are some pictures of the inside.

BAUSTIN

iTrader: (2)

looks like a modded 5 port