MR Ninja MR21 B01 BEARING REPLACEMENT HELP!!
#16
One more MR21B01 ?
Your bearing sizes should be 7mm x 19mm for the front and 14mm x 25.4 for the main. A RB C6 has a 14mm x 25.6mm I believe.
the oven trick works well but I have since bought the GRP bearing removal, installation tool and it works great..
I have never tried a local bearing supply for them, for the rpms we turn in these engines, I;m not sure that I would trust one.
the oven trick works well but I have since bought the GRP bearing removal, installation tool and it works great..
I have never tried a local bearing supply for them, for the rpms we turn in these engines, I;m not sure that I would trust one.
14x25.4x6mm Rear Bearing - ninja JX21B01
SKU: MUGJX08002
Our Price: $46.39
7x19x6mm Front Bearing - ninja JX21B01
SKU: MUGJX08001
Our Price: $20.39
http://www.carolinasrc.com/Webstore/...s/prodList.asp
Why do the prices I am finding on there site seem so much more?
Thanks Again Guys Everyone Here Has Been REally Helpful!
Robb
#17
Tech Fanatic
iTrader: (12)
Rob, I have what you need. You can call or visit our site.
http://tkocompetitiondev.co/shop/index.php?cPath=38_102
You need The CB-607C2RS and the CB-MR25414
909-256-4064
Peter
http://tkocompetitiondev.co/shop/index.php?cPath=38_102
You need The CB-607C2RS and the CB-MR25414
909-256-4064
Peter
#20
But, Peter is the MAN when it comes to Ceramics...
Don't forget to get some of the "lateral thrust" clutch bearings...They are the best I've ever ran. Last a long time, and have very little deflection...Ask Peter about them...You'll be glad you did...
#21
The TKO's are great. Get them straight from TKO. They are the best around AND cheaper than most (that's why you see such a price difference).
The process for replacing the bearings is the same for Ninja's, GRP's RB's etc. only bearing sizes may vary.
The process for replacing the bearings is the same for Ninja's, GRP's RB's etc. only bearing sizes may vary.