Chill_Will

iTrader: (33)

That's cool. They are having a big race in Dothan Al in May of next year. (Wiregrass indoor Nationals) I'm going to try to go to it. Check out the thread on here. It should be a good one.

Jimmy Jacobson

What's up Leon and Chill Will? It's been a long time Will?

Chill_Will

iTrader: (33)

Wow, it's a reunion..hahaha
What's up Jimmy. How are things?

Tim W.

iTrader: (1)

I've had one since they first came out. They are very fast, easy to tune and reliable. GREAT MOTORS

Mo Denton

iTrader: (55)

I wouldnt discourage from the motor due to runtime...people have turned the end points down some and leaned it back out to get the temps back up and gone 11 minutes on the motor on a big track.(and yes I was there and saw it)
as far as power goes...oh yeah its pretty unreal power. I will be breaking mine in tonight for racing this weekend and I will let you guys know how it goes.. also untill Orion I ran the ninja JX-21 and it too has unreal power. the only guys to show the same rip were the ones running the orion motor.
I have the orion pipe and I started with the small resrictor. we'll see how it goes.
thanks
MO

Briguy

iTrader: (125)

With the older wasp .21 I got 12 minutes on an outdoor track and that was with a JP-3 and think #7 insert . I don`t see run time on the new engine being much different .

Losi-Runner

can i ask where you guys r buyin these orion pipes cus i cant seem to find ne place that sells em.

jabroni racing

iTrader: (46)

Im running the 8mm insert and the orion 2066 pipe, i run 20% fuel and have excelltent power and over 8 min run times.. thats all i need, im mad happy with my motor, over a gaallon and a half, and its still building power..

Briguy

iTrader: (125)

I`d like to know also as it seems nobody has them .

Shane Racer

iTrader: (4)

I don't have part #'s in front of me put I think this is the one.

http://www.horizonhobby.com/Products...rodID=ORI88011

Briguy

iTrader: (125)

Too rich for my blood , I`ll put one of my JP or Dynamite pipes on .

punkracer24

iTrader: (13)

the 2035 associated pipe and a 2013 sirio/werks pipe are also very good but of the two i would strongly suggest a 2035

jabroni racing

iTrader: (46)

I asked orion before i got the 2066 pipe which they would recommend between a jp1 and 2, they said the 2 would be better for the motor but the 2066 is the best all around..It comes down to personal preforance and tunning i would think, but mileage and power is definitly there with the 2066