OCM KAOS TRUGGY(PRO AND RTR)
12-02-2007, 11:13 AM
#1
OCM KAOS TRUGGY(PRO AND RTR)
Guys,
Pro Truggy kits are shipping now. I'll have them in shops within the month. The rtr will be a good quality kit and should be ready on the 15th for shipping.
my direct email is [email protected]
I'll keep this thread updated with new options, setups, pictures, videos, build tips, and anything that may be of use to you guys or girls...
We have tested in the USA for several months now with the prototype and it has done very well! It has great steering and handling! I feel this truck will turn with the best of them. It will def. show you who and who does not have steering
IT's a solid truck and for much cheaper than most of the competition...coming in at about $400 you cant beat it
We will also offer the RTR as well. It will include the same plastics, running gear...
The RTR will have a amazing price on them! Stay tuned...
I'll get some vid and pics up for you soon...
Pro Truggy kits are shipping now. I'll have them in shops within the month. The rtr will be a good quality kit and should be ready on the 15th for shipping.
my direct email is [email protected]
I'll keep this thread updated with new options, setups, pictures, videos, build tips, and anything that may be of use to you guys or girls...
We have tested in the USA for several months now with the prototype and it has done very well! It has great steering and handling! I feel this truck will turn with the best of them. It will def. show you who and who does not have steering
IT's a solid truck and for much cheaper than most of the competition...coming in at about $400 you cant beat itWe will also offer the RTR as well. It will include the same plastics, running gear...
The RTR will have a amazing price on them! Stay tuned...
I'll get some vid and pics up for you soon...
12-02-2007, 12:22 PM
#2
Here is some video that was postes on Teck Talk.
Mark Morrow wheeling the OCM truggy:
http://www.j-fam.org/rcpics/MARK_MOR...D_11_24_07.wmv
Some other truggy heat clips:
http://www.j-fam.org/rcpics/THANKSGI...MISC_VIDEO.wmv
Mark Morrow wheeling the OCM truggy:
http://www.j-fam.org/rcpics/MARK_MOR...D_11_24_07.wmv
Some other truggy heat clips:
http://www.j-fam.org/rcpics/THANKSGI...MISC_VIDEO.wmv
12-02-2007, 12:25 PM
#4
Here is a video of our first race with the OCM Truggy in the US.
This was the Summer Shootout in Birmingham, Al
http://www.youtube.com/watch?v=_SgzMa6jeEo
This was the Summer Shootout in Birmingham, Al
http://www.youtube.com/watch?v=_SgzMa6jeEo
12-02-2007, 12:27 PM
#5
http://youtube.com/watch?v=u7kB76P7lP8
Truggy amain.....
Mr. Crash decided he would hit a cross tie a few minutes in
You did a great Job for the first outing! This was the cause of our first and only broken part lol....
Truggy amain.....
Mr. Crash decided he would hit a cross tie a few minutes in
You did a great Job for the first outing! This was the cause of our first and only broken part
lol....
12-02-2007, 12:29 PM
#6
The OCM DT-19T 1/8 truggy will have a approx. street price of $400.00. This will include a tote bag, aluminum cnc shock towers, cnc rear toe block, anti dive block, kick up block and front arm brace. It also has a cnc radio plate and will take a hump or flat pack. It comes with two style lids.
Of Course the truck comes w/ pillow ball suspension which is well known for it's rough track handling. As you see in the video, dry or grooved the truck will turn!
OCM RACING is offering you a "pro level" competition truggy kit for a fraction of the cost of the leading brands!
In the videos the setups were almost identical...as you will see wet or dry tracks the truck real turns well and comes out of the corner...
Of Course the truck comes w/ pillow ball suspension which is well known for it's rough track handling. As you see in the video, dry or grooved the truck will turn!
OCM RACING is offering you a "pro level" competition truggy kit for a fraction of the cost of the leading brands!
In the videos the setups were almost identical...as you will see wet or dry tracks the truck real turns well and comes out of the corner...
12-02-2007, 12:33 PM
#7
So far this is the setup we have been running for the most part:
Diffs 5/7/3
Shock springs: OCM BLUE/mugen reds...
Shock oil: 45/40
Pistons:1.5
Outside on arms and middle hole on towers
long wheel base
Rear toe insert: 1degree
Anti-squat: .5 insert up
Upper arm insert: 1.5 down
front lower arm insert: 0 deg
front arm toe insert: 1 out
46 spur gear, sometimes 48th...
.21 engine, 1.0 springs, alum clutch
BOW TIE MTR or holeshots mtr w/ jammin offset wheels..
Thanks!
AB
Diffs 5/7/3
Shock springs: OCM BLUE/mugen reds...
Shock oil: 45/40
Pistons:1.5
Outside on arms and middle hole on towers
long wheel base
Rear toe insert: 1degree
Anti-squat: .5 insert up
Upper arm insert: 1.5 down
front lower arm insert: 0 deg
front arm toe insert: 1 out
46 spur gear, sometimes 48th...
.21 engine, 1.0 springs, alum clutch
BOW TIE MTR or holeshots mtr w/ jammin offset wheels..
Thanks!
AB
12-03-2007, 06:50 AM
#8
will the truck be equipped with bigbores, and large diameter wheels and JConcepts lid? I heard a rumor that it was, Im interested in seeing one
Last edited by pwnzor; 12-03-2007 at 07:12 AM.
12-03-2007, 12:53 PM
#9
Can't wait to get my OCM truggy. Guys, I must say, since switcing to OCM in buggy, I was impressed with the design and craftsmanship of this car. The truggy should be the same and I am anticipating it arrivel in the states. i will be working on getting a LHS in the Houston area to carry parts for the OCM brand.....Guys, you WON'T be dissappointed....
12-03-2007, 02:14 PM
#10
I'm greatly looking forward to seeing it, sounds like a sweet platform
12-03-2007, 05:01 PM
#12
Hello Alan,
can you fill in the blanks for inquiring minds.............LOL thanks a lot Trevor
Length:
Width:
Wheelbase:
weight:
Final drive ratio:
can you fill in the blanks for inquiring minds.............LOL thanks a lot Trevor
Length:
Width:
Wheelbase:
weight:
Final drive ratio:
12-04-2007, 02:39 AM
#13
Tech Regular
i dont think they will have the Jconcept body, it ll probably have OCM designed body and big bore shocks we ll just have to wait and see.
12-04-2007, 05:53 AM
#14
according to the info Alan posted on another forum, it will indeed have the JConcepts lid, it will come with their standard shocks that they have been testing, with awesome results. The BB"S will however be available as an option soon . The wheel / tire combo will be to the buyers discretion, with the price of this kit, you will have coin left to go buy the set that is perfect for the racing surface you run on
Last edited by pwnzor; 12-04-2007 at 06:51 AM.
12-04-2007, 06:48 AM
#15
pre-built!?!?...oohhh yeah, ill be running it this weekend hopefully!!!!