BEST WAY TO CHANGE FRONT BEARING
04-29-2008, 04:33 PM
#1
BEST WAY TO CHANGE FRONT BEARING
what is the best way? ordered new tko ceramic for my v-spec (already has ceramic rear)......
04-29-2008, 05:48 PM
#3
1)do complete disassembly of engine and clean case
2)throw new bearing in freezer
3)heat case on a hotplate with the front bearing down
4)lightly tap out front bearing with brass punch
5)lightly tap in new bearing
6)lube up engine parts with after run oil and reinstall
2)throw new bearing in freezer
3)heat case on a hotplate with the front bearing down
4)lightly tap out front bearing with brass punch
5)lightly tap in new bearing
6)lube up engine parts with after run oil and reinstall
04-29-2008, 11:43 PM
#4
Tech Rookie
THE BEST TOOL FOR REMOVING FRONT BEARING IS JP RACING #93862(http://www.jpracing.com/en/products/...essories/).FOR REMOVING THE REAR AND PUT A NEW ONE(FRONT OR REAR) THE BEST ARE FROM RB 01150(MOUNTING) AND 01400(BEARING EXTRACTOR)(http://www.rbproducts.com/mainEn.php...ille=DIV&go=go
).OF COURSE ALL THESE ARE A LITTLE EXPENSIVE BUT YOU WON'T DAMAGE YOUR ENGINE.YOU MUST HEAT UP THE ENGINE AND WITH THESE TOOLS.IT IS BETTER
).OF COURSE ALL THESE ARE A LITTLE EXPENSIVE BUT YOU WON'T DAMAGE YOUR ENGINE.YOU MUST HEAT UP THE ENGINE AND WITH THESE TOOLS.IT IS BETTER
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
