RB S3 X-Dyno results
04-24-2008, 11:58 PM
#1
RB S3 X-Dyno results
This is an engine I did for one of my drivers. And all Stage 1 RB S3s will be like this..My drivers get what the customer gets as far as engine modifications. So I dont want anyone thinking my drivers get engines that the customers dont get. Just wanted to clear that up 1st 
He uses this mill for indoor tracks in buggy. He wanted more power but not overkill and wanted the top end brought out of it as it really lacks top end stock as seen from the stock dyno chart. So a stage 1 was put in place and here are the results. As you can see there is an increase in power all over the powerband "not just peak #s" with a very nice gain up top in the higher RPM range where this mill lacked the most. This is the dyno runs from the engine stock then after the modifications.
He uses this mill for indoor tracks in buggy. He wanted more power but not overkill and wanted the top end brought out of it as it really lacks top end stock as seen from the stock dyno chart. So a stage 1 was put in place and here are the results. As you can see there is an increase in power all over the powerband "not just peak #s" with a very nice gain up top in the higher RPM range where this mill lacked the most. This is the dyno runs from the engine stock then after the modifications.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
