Pipe for OS Vpec?
 

Any experiences with the JP4?

How 'bout OS 2060 or 2020?

Any help would be appreciated!

the jp-3 works really good with the v-spec. the jp4 is the same as the jp3 but made to be efra approved. also the os 2060 pipe works
extremely well.:nod:

I will say that I am running the JP-4 with my v-spec and it is smooooooth. Love it top to bottom end.

You will love the O.S. Speed 2060 pipe with the V-Spec. Tons of power everywhere and still easy to control. The price is a little steep compared to other pipes but WELL worth the $$. IMO, get the 2060. It's a perfect match for the V-Spec!!

Also check out this pipe eb mods EB926 :http://www.amainhobbies.com/product_...ducts_id/19773
on sale now .:D

yeah, whatever you do, dont use the pipe that was designed for the motor.

One pipe to try is the TTR 2035. Not expensive at all either. The JP-4 should be good also if not going with a 2050 or 2060.

I've got a JP4 on mine and it gives tons of power, both on the bottom and top end. At my track, there's not one car that can outrun it. Now if I could only drive better :lol:

TTR 2035 is the best pipe i have used on a vspec so far, and i have used a 2050 and 2060

I AM RUNNIN THE JP4 ON MINE AND LOVE IT AND THE JP3 IS NOT LIKE THE JP4 JP4 GOTS A TOTALLY DIFFERENT KIND OF PING TO THEN ALL OF THE JPS

I've ran the jp-3 and jp-2 with my v-specs,but, hands down the speed 2060 that I have now is the best that I have ran..would like to try the jp-4...

+1 on the Thunder Tiger 2035

The os T-2060 gets the best fuel mileage on the v-spec. I was getting 13 minutes at the 2008 Silverstate.

13 mins hmm
tech the tank and the length of fuel tubing;)

I too have been getting close to that fuel milage with a OS 2050. Legal tank capacity and all.