Engine Cutting out at high revs
#1
Engine Cutting out at high revs
Hi I have a Nanda Rapter with a .27 engine.
My problem is when i go to give the car a gut full when it hits high revs it wont click into 2nd gear and the engine cuts out. It will drive around in first no problem but as soon as it hits high revs it cuts out.
Does anyone have any idea where i could start to try and fix this problem.
Cheers Yuppi1
My problem is when i go to give the car a gut full when it hits high revs it wont click into 2nd gear and the engine cuts out. It will drive around in first no problem but as soon as it hits high revs it cuts out.
Does anyone have any idea where i could start to try and fix this problem.
Cheers Yuppi1
#2
Try riching it up a little on the high end, sounds like its a little lean to me if it starts to cut out on the high end. Run a couple high speed passes after you change the setting.
#4
oh.. sorry high speed passes just means, making a full throttle run in a open area to get the motor set to the new settings which gets up into the high end of the motor. If you have a manual, read it cover to cover a few times!
#5
This will help you with tuning your engine and understanding what does what with your engine.
http://www.rctech.net/forum/attachme...ble-rob-paris-
http://www.rctech.net/forum/attachme...ble-rob-paris-