Understeer on a XRAY XB8.. HOw to fix it?
Hey guys.
Im helping setup my younger cousins XB8. It has a ton of under steer. It keeps pushing. What options do I have to correct understeer with this buggy? 1.5 toe out 2 neg camber front/ rear Thank you |
http://forum.teamxray.com/xform/inde...95&setup=xb8ec
this was my base set up for this car. it worked very well on most tracks post the set-up your using |
Thank you very much for the setup? What kind of track were you running this setup at? I am at a Clay indoor track.
Thank you |
Originally Posted by Mpowerz
(Post 4223052)
Thank you very much for the setup? What kind of track were you running this setup at? I am at a Clay indoor track.
Thank you http://forum.teamxray.com/viewtopic....ghlight=#64203 Xray's dont have as much throw as the other buggies so the knuckles strike the arms and cvd limiting the steering throw, eg. producing a good bit of understeer. I made the steering modification and immediately noticed a huge difference in the turning radius of the buggy. The biggest difference came when I re-geared my buggy using the truggy crown and pinion gears (43/10 vs. 40/12) also I went to a 44/16 on the Spur Gear and Clutch bell. For a reference look at Ryan Lopez's setup on the team xray forum. I am starting my third gallon of fuel on my EC and with the changes I've just listed, plus running Lopez's setup, I've TQ'ed and one my last two races. These changes made a night and day difference in the handling of my EC. Good luck! |
All times are GMT -7. It is currently 09:35 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.