OCM KAOS DOMINATING
#273
Tech Addict
iTrader: (16)
My clutch bell also sat way too forward. I ended up using a sportwerks mayhem flywheel. That is the only thing I can use to make it line up. I have flipped the engine mounts everyway possible, taken apart and reassembled clutch countless times, and check measurements between multiple chassis. The flywheel I received in my kits just wont work. The sportwerks flywheel, fixed all my issues. They are cheap to.
Thanks Adam
Thanks Adam
#274
Tech Elite
iTrader: (24)
Cody,
I'm curious who broke three bell gears. I have yet to hear of this. I would like to look into it though. I have ran mine along with others and have had no issues. So when this comes up I like to know how they broke if used properly.
Please email me.
THe problem is not in the flywheel or clutchbell guys. The motor mounts were machined with the holes a bit to much forward. This is fixed in our new one piece mount that is going to arrive thursday! lol...
I'm curious who broke three bell gears. I have yet to hear of this. I would like to look into it though. I have ran mine along with others and have had no issues. So when this comes up I like to know how they broke if used properly.
Please email me.
THe problem is not in the flywheel or clutchbell guys. The motor mounts were machined with the holes a bit to much forward. This is fixed in our new one piece mount that is going to arrive thursday! lol...
#278
...
Last edited by g26er; 05-11-2010 at 11:11 AM.
#281
Tech Master
iTrader: (38)
Join Date: Jul 2007
Location: Planet Earth, 3rd Planet from the Sun
Posts: 1,119
Trader Rating: 38 (100%+)
Alan, was wondering what the status is on my EVO kit parts and the parts that got lost in the mail? Haven't seen the replacements yet....
Are they on their way?
Are they on their way?
#283
Tech Elite
iTrader: (24)
Soon to hit the stores
Got the shipment in Be busy for a while unloading and stocking. We
got the new one peice mounts and the look great! Holes are back so now
no more alighnment issues. We also have the new rear Aluminum hubs!
They have a very neat design for them, you have the hub that is
drilled oversized for the bearing. Then a plastic bushing goes in that
is 16mm, then your 8x16 bearing. This way it is a much better fit and
your nice hubs will not develope slop from the metal to metal wear
Got some new sway bars in(I'll look at sizes later) and a few more
goodies to top of the stock.
got the new one peice mounts and the look great! Holes are back so now
no more alighnment issues. We also have the new rear Aluminum hubs!
They have a very neat design for them, you have the hub that is
drilled oversized for the bearing. Then a plastic bushing goes in that
is 16mm, then your 8x16 bearing. This way it is a much better fit and
your nice hubs will not develope slop from the metal to metal wear
Got some new sway bars in(I'll look at sizes later) and a few more
goodies to top of the stock.
#285
Tech Master
iTrader: (38)
Join Date: Jul 2007
Location: Planet Earth, 3rd Planet from the Sun
Posts: 1,119
Trader Rating: 38 (100%+)
Wooohoo parts arrived today!
Thanks Alan! Best damn customer support of ANY RC car manufacturer I've ever had the pleasure of doing business with!
Thanks Alan! Best damn customer support of ANY RC car manufacturer I've ever had the pleasure of doing business with!