Hyper ST thread
#61
Tech Master
iTrader: (8)
just wondering what after market shells everyone is running as it is time to give mine a freshen up and i dont want to ordr the wrong ones. do mbx5t shells fit the pro without cutting out to much of the shell away??? aus dollar good at the moment so it is time to get the supplies for rest of year and would like some help on shell choice.. and paint jobs if you got any pics as well ty
#64
Tech Rookie
Hey guys, I just bought an ST Pro and I LOVE IT ! !
What clutch systems are you all running ?
And have any of you done the 8/8.5 receiver box mod?
I really dont like the stock one.
Cheers, Kal
What clutch systems are you all running ?
And have any of you done the 8/8.5 receiver box mod?
I really dont like the stock one.
Cheers, Kal
#65
Tech Master
iTrader: (38)
Get the Jammin 16mm big bore shocks and start with the 1.2 pistons, then drill out 3 holes on the front pistons to 1.3mm, and drill out 3 holes on the rear pistons to 1.35mm. Then put 37.5 WT front and 40 WT rear with the Gray springs. Mount the front shock on the outermost hole on the tower, and second outmost hole on the arm. For the rear, mount the shock on the second inner most hole on the towers, and the outer most hole in the arms. It Should feel very good.
Last edited by losi guy; 05-20-2008 at 04:55 PM.
#66
Tech Master
iTrader: (38)
M2C 4-Shoe racing clutch With the Reg. Soft Shoes, and 2 .95 springs, and 2 1.0 springs (truggy setup only, the buggy setup uses different shoes and springs). Very nice setup. Short aproach triples are much easier. I got mine from Nitrohouse. I didn't do the box mod but from what I heard it's not that hard.
#67
Tech Rookie
losi guy- Thanks mate
#68
Tech Master
iTrader: (38)
http://www.nitrohouse.com/options_hyper_8.htm
That's a link for the clutch, just go near the bottom and you'll see it.
That's a link for the clutch, just go near the bottom and you'll see it.
#70
Tech Fanatic
iTrader: (1)
I was at a nice county run track this weekend that seemed made for truggies. Saw 5 brands of 'em, 4 were RTR rigs. None of the guys went to the races just bashing and having fun. Guess what? The Hyper ST was moneky stompim' the heart out of 'em. The only thing he had new was tires 'cause he loved to do fast donuts around his buddies when they crash. Really, stock servos and he could tune the mill some more. Hummm...I guess its time to get in the penny jar and start counting.
#72
Tech Rookie
have a newbie qn i'm doing some testing on my new 2nd hand hyper ST, and the engine seems to burn out after 15 minutes of continous play. as in, the engine jus shuts down and smoke comes out from where the glow heater is. is tt bad for the truggy? any idea what causes this problem?
#74
Are any of you guys running the Super BB shocks with you Hyper ST's? If so what setup are you running? I am currently running the 'blue' springs and 45wt oil, and I think I need to get harder springs. Before I do, just wanted to see what other people are running...
#75
Tech Regular
I run front gray springs 55 losi oil and rear blue spring with 45 losi oil