For sale/trade thread
#5012
Tech Regular
iTrader: (28)
Got two on-road cars for sale.
Tamiya M-03 with original silver can (properly broke in), dynamite speed control, and a cooling fan for the motor. Will come with a Datsun 510 body recently painted and in great shape (pictured), also include a hatchback body (not sure which one), a new gear diff was installed and raced once (properly shimmed), and a like new ball diff will also be included. Car is set up for racing at Hobbytown and is very competitive (took first in one of the mains at the first on-road point series). Will also include a like new 4200mah 2s pack that has only be used with this mini for about 4 months (tons of life left). Also recently installed a fresh set of Tamiya S grip tires on the front (only two days of racing on them). Looking to get $100 for all that listed. Just add radio and servo.
Next up is my 3racing F109. This was their original formula one car and is in great shape as well. I installed a Tamiya F104 front end, Tamiya low friction metal suspensions balls on both sides, have a Tamiya spring kit for the front end, and freshly built ball diff for the rear. Also installed the one piece Tamiya thrust bearing on the ball diff. Car will include a used set of Tamiya soft tires (still plenty of life) and the painted lotus body pictured. Car will come as complete rolling chassis. Looking to get $75 (great for those interested in getting into F1).
PM me for more pictures! Selling these cars because I recently bought two chassises one for touring car and one for USGT. PM me here for quickest reply.
Tamiya M-03 with original silver can (properly broke in), dynamite speed control, and a cooling fan for the motor. Will come with a Datsun 510 body recently painted and in great shape (pictured), also include a hatchback body (not sure which one), a new gear diff was installed and raced once (properly shimmed), and a like new ball diff will also be included. Car is set up for racing at Hobbytown and is very competitive (took first in one of the mains at the first on-road point series). Will also include a like new 4200mah 2s pack that has only be used with this mini for about 4 months (tons of life left). Also recently installed a fresh set of Tamiya S grip tires on the front (only two days of racing on them). Looking to get $100 for all that listed. Just add radio and servo.
Next up is my 3racing F109. This was their original formula one car and is in great shape as well. I installed a Tamiya F104 front end, Tamiya low friction metal suspensions balls on both sides, have a Tamiya spring kit for the front end, and freshly built ball diff for the rear. Also installed the one piece Tamiya thrust bearing on the ball diff. Car will include a used set of Tamiya soft tires (still plenty of life) and the painted lotus body pictured. Car will come as complete rolling chassis. Looking to get $75 (great for those interested in getting into F1).
PM me for more pictures! Selling these cars because I recently bought two chassises one for touring car and one for USGT. PM me here for quickest reply.
#5013
Tech Initiate
Iso pff road set up sct buggy or trick
Looking for an off road racing set up i need everything again sold everything thinking i was done with rc got the itch again text me with what you got 712-438-0071
#5014
time to clean up
I have a few items that need to go
1st sc10.2 factory team raced 2 nights comes with a few extras stock clear body unpainted, comes with proline hiflow body ran 1 race night. asking sold
Also viper vtx10 black edition with program box ran maybe 4 race nights 125.00
[IMG][/IMG]
I also have 2 Hitec X1 Touch AC/DC chargers bought these in October not much use.. paid 109.00 each looking for 80.00 each or 145.00 for both
[IMG][/IMG]
1st sc10.2 factory team raced 2 nights comes with a few extras stock clear body unpainted, comes with proline hiflow body ran 1 race night. asking sold
Also viper vtx10 black edition with program box ran maybe 4 race nights 125.00
[IMG][/IMG]
I also have 2 Hitec X1 Touch AC/DC chargers bought these in October not much use.. paid 109.00 each looking for 80.00 each or 145.00 for both
[IMG][/IMG]
Last edited by wood_train; 12-19-2014 at 08:50 AM. Reason: x
#5015
In need of a 21.5 brushless for USGT class, let me know what you got. May need ESC too.
#5016
Tech Rookie
I have a 21.5. will sell or trade for a 25.5.
#5017
Tech Master
iTrader: (45)
Go check this car out. Im selling my Losi 8ight 3.0. This is a great car. Works really well in Omaha.
http://www.rctech.net/forum/r-c-item...l#post13737741
http://www.rctech.net/forum/r-c-item...l#post13737741
#5018
Tech Master
iTrader: (28)
I am going to be selling off a few things here soon.
1. B5 that has a few option parts installed. Jc front ti axels, and al hexes. Looking to get SOLD
2. B5m. This has a few more option parts. Cut gears in the tranny, lightweight top shaft, mip puck system, jc ti axels, and al hexes. I am looking to get SOLD
3. 22-4. This one is box stock, with the exception of sway bars for the rear, and rear extended width hexes. Looking to get 300 for it.
All cars are very low hours, low race count on them. If I were to guess I would say probably 6 races total per car.
I can make them artr, if that is what you are looking for.
I also have an airtronics m11x. I have 3 Rx for it, lipo, nicad, and a al case for the radio itself. Looking to get SOLD
All prices are obo, so go ahead and make offers. You can text me with questions. 402-960-6932. I will post pics on Saturday!
1. B5 that has a few option parts installed. Jc front ti axels, and al hexes. Looking to get SOLD
2. B5m. This has a few more option parts. Cut gears in the tranny, lightweight top shaft, mip puck system, jc ti axels, and al hexes. I am looking to get SOLD
3. 22-4. This one is box stock, with the exception of sway bars for the rear, and rear extended width hexes. Looking to get 300 for it.
All cars are very low hours, low race count on them. If I were to guess I would say probably 6 races total per car.
I can make them artr, if that is what you are looking for.
I also have an airtronics m11x. I have 3 Rx for it, lipo, nicad, and a al case for the radio itself. Looking to get SOLD
All prices are obo, so go ahead and make offers. You can text me with questions. 402-960-6932. I will post pics on Saturday!
Last edited by omaha_racing; 12-28-2014 at 01:26 PM.
#5019
Taxxas E-Maxx RTR
SOLD
Selling to get new on-road...
Traxxas E-Maxx - many upgrades.All electronics included. It scoots with the new Lipos. 2 speed tranny..all the parts go with the truck. I bought 2 new motors for it (included). Both bodies are included (jeep needs different posts). The Charger (lead ext's) and (2) Lipos were purchased new from the Plex about 30 days ago and have 2 charges on them.. Can meet you anytime in Omaha or at the Plex... $350 for all... Rich 402-651-4808
Selling to get new on-road...
Traxxas E-Maxx - many upgrades.All electronics included. It scoots with the new Lipos. 2 speed tranny..all the parts go with the truck. I bought 2 new motors for it (included). Both bodies are included (jeep needs different posts). The Charger (lead ext's) and (2) Lipos were purchased new from the Plex about 30 days ago and have 2 charges on them.. Can meet you anytime in Omaha or at the Plex... $350 for all... Rich 402-651-4808
Last edited by omaharich68; 12-28-2014 at 06:46 AM.
#5020
SOLD*
Last edited by omaharich68; 12-28-2014 at 06:46 AM.
#5021
Is one of those Rx's a 92524? If so, would you want to sell it separately?
#5022
Tech Rookie
SOLD----4 duratrax ice chargers and two power supplies for sale.
Asking 50 each charger, 50 for the double power supply, and 25 for the single power supply. Or buy it all for 150.
Asking 50 each charger, 50 for the double power supply, and 25 for the single power supply. Or buy it all for 150.
Last edited by ski; 12-29-2014 at 02:41 PM. Reason: sold
#5024
sold
Last edited by Evo4Buggy; 01-01-2015 at 10:49 AM. Reason: sold