For sale/trade thread
#4951
Tech Adept
iTrader: (3)
Associated T4 Team+ with extras, assembled and setup ready to run!!
I'm selling an Associated T4 stadium truck, ready to run. All you need to do is paint the body and hit the track!!
Made from parts left over from my last truck build, some parts I had and some purchased parts, The truck itself is brand new!! I call it a Team + because it has many of the parts that came with a Factory Team kit. I traded out the carbon fiber parts that I used for my truck for the composite plastic chassis, arms, towers, etc. The Factory team T4.1 and 4.2 kits were sold with these plastics and not the carbon fiber. Easily upgradeable to T4.2 specs if you choose to in the future.
Includes the parts that you didn't find on a Team or Ready to run versions--
-Ball bearing steering
-Threaded V1 shocks with titanium gold shock shafts
-blue titanium turnbuckles
-lightened transmission outdrives
-The blue "bling" extras
Shocks were built with X-ring seals instead of the kit seals.
Truck is ready to go to hit the track, I have already set up the car and all the adjustments on the radio, speed control have been made.
Comes with a used and tested Novak Kinetic speed control. This was their top of the line speed control before Novak came out with the Pulse. Most any adjustment that can be made on a speed control can be done on this one. No motor limit. This speed control was one I bought new and used myself.
A used LRP X-11 7.5 motor with a new 18 tooth Robinson pinion installed.
A used Hobby People 5000mah 35C battery. Not puffed and has been used recently and charges, balances like a new one.
A new Team Associated XP3D 10 model 27mhz FM transmitter and receiver with channel 30 crystals. Glitch buster capacitor installed.
A used Team Associated(XP digital) S2008mg metal gear steering servo installed.
Both the radio system and servo came out of my RTR SC8 when I purchased it years ago.
Comes with the following--
Comes with the tires pictured installed on the truck--
JConcepts Green Barcodes rear
Proline M4 Scrubs front
Both sets are at 80% or better and will work excellent on most indoor tracks.
Also included for both indoor and outdoor tracks--
Proline M3 Edge fronts
Losi Red 8 rib fronts(with bearings installed)
Proline M3 Square Fuzzies rear
Losi Red Ifmar pins rear
Proline M3 Bow ties rear
Proline M4 Suburbs rear
Extra new front and rear rims
3 new sets of standard tire foam
New Associated body
Kit tools
Extra servo horns from the kit, 4 new bearings(wheels on the truck have 4 Avid bearings installed already), body clips
Kit T4 manual
setup sheet with the setup on the truck
Associated kit box, Kinetic box with setup manuals and a new fan
And more goodies--
30 and 35 wt shock oil
kit black grease and diff grease
New gear cover
New Robinson 20 tooth pinion
New front and rear hinge pins
New steering rack
New inline steering blocks
New front brace
New steel turnbuckles
New ball cups
New ball studs
E-clips
New kit shock seals and an extra set of new X-ring seals
Bag of used steering rack parts
Bag full of used parts including--
front and rear arms
steering and caster blocks
hub carriers
front bulkhead and bumper
front shock tower
rear T-plate and hinge pin mount
and some other things I probably forgot to list
a brand new 12.5 amp(150 watt) power supply--I put on the power cord and a deans plug for easy hookup and storage. Would easily handle charging two 7.4 batteries at the same time with another charger if you want in the future.
a brand new Lipo/LiFe/LiIon/NiMH/NiCd/Lead acid 5 amp balance charger w/instruction manual. Added the deans plug for easy hookup to the power supply and built a lead for hooking to your car battery if you need it.
Only powered up to check my solder joints and see if it would charge a battery, works great!!
new set of servo horns
25 wt. shock oil
Set of used rear JConcepts Green compound Pressure Points
Will throw in my used Trinity D3.5 17.5 in with the deal since I've got the new D4 now, so this truck is ready to jump right in the stock class with the purchase of a pinion and spur gear--Also, will throw in a Spektrum SR3000 receiver if you have a Spektrum radio to use it with instead of the Team Associated radio and receiver.
Looking to get started racing?? Want to get into stadium truck?? Here you go--
$350 shipped to the 48 states, continental US only. Paypal only. Contact me by PM or on this thread. I can send you a Paypal invoice, PM me your Paypal email address. Or PM me to get mine if you wish to pay yourself. Make sure your shipping address is correct when you send your payment!! Package weight is over 18 lbs.
Any questions, please ask--Thanks for looking!!
Phil
Made from parts left over from my last truck build, some parts I had and some purchased parts, The truck itself is brand new!! I call it a Team + because it has many of the parts that came with a Factory Team kit. I traded out the carbon fiber parts that I used for my truck for the composite plastic chassis, arms, towers, etc. The Factory team T4.1 and 4.2 kits were sold with these plastics and not the carbon fiber. Easily upgradeable to T4.2 specs if you choose to in the future.
Includes the parts that you didn't find on a Team or Ready to run versions--
-Ball bearing steering
-Threaded V1 shocks with titanium gold shock shafts
-blue titanium turnbuckles
-lightened transmission outdrives
-The blue "bling" extras
Shocks were built with X-ring seals instead of the kit seals.
Truck is ready to go to hit the track, I have already set up the car and all the adjustments on the radio, speed control have been made.
Comes with a used and tested Novak Kinetic speed control. This was their top of the line speed control before Novak came out with the Pulse. Most any adjustment that can be made on a speed control can be done on this one. No motor limit. This speed control was one I bought new and used myself.
A used LRP X-11 7.5 motor with a new 18 tooth Robinson pinion installed.
A used Hobby People 5000mah 35C battery. Not puffed and has been used recently and charges, balances like a new one.
A new Team Associated XP3D 10 model 27mhz FM transmitter and receiver with channel 30 crystals. Glitch buster capacitor installed.
A used Team Associated(XP digital) S2008mg metal gear steering servo installed.
Both the radio system and servo came out of my RTR SC8 when I purchased it years ago.
Comes with the following--
Comes with the tires pictured installed on the truck--
JConcepts Green Barcodes rear
Proline M4 Scrubs front
Both sets are at 80% or better and will work excellent on most indoor tracks.
Also included for both indoor and outdoor tracks--
Proline M3 Edge fronts
Losi Red 8 rib fronts(with bearings installed)
Proline M3 Square Fuzzies rear
Losi Red Ifmar pins rear
Proline M3 Bow ties rear
Proline M4 Suburbs rear
Extra new front and rear rims
3 new sets of standard tire foam
New Associated body
Kit tools
Extra servo horns from the kit, 4 new bearings(wheels on the truck have 4 Avid bearings installed already), body clips
Kit T4 manual
setup sheet with the setup on the truck
Associated kit box, Kinetic box with setup manuals and a new fan
And more goodies--
30 and 35 wt shock oil
kit black grease and diff grease
New gear cover
New Robinson 20 tooth pinion
New front and rear hinge pins
New steering rack
New inline steering blocks
New front brace
New steel turnbuckles
New ball cups
New ball studs
E-clips
New kit shock seals and an extra set of new X-ring seals
Bag of used steering rack parts
Bag full of used parts including--
front and rear arms
steering and caster blocks
hub carriers
front bulkhead and bumper
front shock tower
rear T-plate and hinge pin mount
and some other things I probably forgot to list
a brand new 12.5 amp(150 watt) power supply--I put on the power cord and a deans plug for easy hookup and storage. Would easily handle charging two 7.4 batteries at the same time with another charger if you want in the future.
a brand new Lipo/LiFe/LiIon/NiMH/NiCd/Lead acid 5 amp balance charger w/instruction manual. Added the deans plug for easy hookup to the power supply and built a lead for hooking to your car battery if you need it.
Only powered up to check my solder joints and see if it would charge a battery, works great!!
new set of servo horns
25 wt. shock oil
Set of used rear JConcepts Green compound Pressure Points
Will throw in my used Trinity D3.5 17.5 in with the deal since I've got the new D4 now, so this truck is ready to jump right in the stock class with the purchase of a pinion and spur gear--Also, will throw in a Spektrum SR3000 receiver if you have a Spektrum radio to use it with instead of the Team Associated radio and receiver.
Looking to get started racing?? Want to get into stadium truck?? Here you go--
$350 shipped to the 48 states, continental US only. Paypal only. Contact me by PM or on this thread. I can send you a Paypal invoice, PM me your Paypal email address. Or PM me to get mine if you wish to pay yourself. Make sure your shipping address is correct when you send your payment!! Package weight is over 18 lbs.
Any questions, please ask--Thanks for looking!!
Phil
Last edited by farmerphil22; 10-16-2014 at 04:41 PM. Reason: price lowered!!
#4952
NEED 13.5 MOTOR
I need a sensored 13.5 motor by Fri. You can text me 4029536668.
#4953
#4954
I'm selling my Custom Works Rocket 2.0 late model roller with a spektrum steering servo,Novak velocity 13.5 moter and a fairly new stalker body ,,,the car is in great shape ,if you've seen me race at the Plex that's the late model that I entered,it has 10 to 11 races on it the 2014 summer series,the I80 finals race and give or take 2 to 3 other races,I am purchasing a new car even though this one is fairly new,,,, $325 jus add receiver/speedo and go,if interested pm me ,,,,,,thanks..F.MURRAY00M
#4955
Tech Elite
iTrader: (145)
Hey guys! I have for sale a Tekin RS Pro that has been used for only 2 race weekends in my pro2 truck. It is in great condition and performs awesome. The software is all updated and runs very smooth. The only reason I am selling is because I need the money. Let me know if you are interested. I'm asking $120 shipped but let me know if you have an offer.
Thank you!
Kyle
Thank you!
Kyle
#4959
Dynamite passport ultra charger
http://www.dynamiterc.com/Products/D...ProdID=DYN4064
Got this in a lot I bought works great comes with deans plus, and a few other plugs. Works off ac/dc. It was purchased at the plex for 129.99 plus tax looking for 70.00/offer.
[IMG][/IMG]
[IMG][/IMG]
Text 402-598-0699.
Got this in a lot I bought works great comes with deans plus, and a few other plugs. Works off ac/dc. It was purchased at the plex for 129.99 plus tax looking for 70.00/offer.
[IMG][/IMG]
[IMG][/IMG]
Text 402-598-0699.
#4960
Looking for a touring car. Preferably a tc6 let me know what you have. Also if I can find a good deal looking for an rc12r5.2
Last edited by wood_train; 10-04-2014 at 04:05 PM. Reason: Adding another car
#4961
Tech Adept
looking for servos, motor/esc combo, radio.
looking for a few things....
2 servos 4x4 and 2wd both for sct
stock 17.5 esc motor combo (inexspensive) for my sct
possibly upgrading my radio....i now have a dx3c
send me a text or pm with what you have and price i live in omaha so prefer to buy local to save on shipping costs.... 402-651-2799
2 servos 4x4 and 2wd both for sct
stock 17.5 esc motor combo (inexspensive) for my sct
possibly upgrading my radio....i now have a dx3c
send me a text or pm with what you have and price i live in omaha so prefer to buy local to save on shipping costs.... 402-651-2799
#4962
Tech Apprentice
I AM GETTING OUT OF RACING SO I AM SELLING EVERYTHING. HERE IS A LINK TO MY CRAIGSLIST ADD
http://omaha.craigslist.org/tag/4705854474.html
http://omaha.craigslist.org/tag/4705854474.html
#4963
Tech Apprentice
I AM GETTING OUT OF RACING SO I AM SELLING EVERYTHING. HERE IS A LINK TO MY CRAIGSLIST ADD
http://omaha.craigslist.org/tag/4705854474.html
http://omaha.craigslist.org/tag/4705854474.html