OK, WHAT did you do to your MONSTER TRUCK,today?
#62
Tech Apprentice
iTrader: (3)
After breaking both the One-Way Bearing and the gear it's set in, I am debating on going with a pull star which I've seen a fair few people suggest.
#68
Shock protection :RPM new product.
For the 4 rear shocks,but I didn't buy them from Tower Hobbies.
http://www3.towerhobbies.com/cgi-bin/wti0001p?
&W=000331276&I=L5BNYL02&P=K
Liquid R/C has ONE dollar shipping.
I run 8 Associated shocks on my BIG truck,w/HPI purple springs.
http://www.liquidrc.com/index.php?ma...ducts_id=75705
http://www3.towerhobbies.com/cgi-bin/wti0001p?
&W=000331276&I=L5BNYL02&P=K
Liquid R/C has ONE dollar shipping.
I run 8 Associated shocks on my BIG truck,w/HPI purple springs.
http://www.liquidrc.com/index.php?ma...ducts_id=75705
#69
Started retuning my ercm xl since removing the 24mm baja wheels & going back to the 17mm's. Ran 2 tanks thru her in my back yard. Next is to start on shift points when I can find some time to get out to one of my usual spots since my neighbors like to call the cops on me when Im in front of my house. Also relubed the rotating assembly in the motor with some zmax tonight letting it soak in. Havent found much time to play lately with temps around & over 100f tho.
#70
HOT! HOT! HOT!
Started retuning my ercm xl since removing the 24mm baja wheels & going back to the 17mm's. Ran 2 tanks thru her in my back yard. Next is to start on shift points when I can find some time to get out to one of my usual spots since my neighbors like to call the cops on me when I'm in front of my house. Also relubed the rotating assembly in the motor with some zmax tonight letting it soak in. Havent found much time to play lately with temps around & over 100f tho.
Z maxx? Synthetic lube will work and it's available by the QUART.1 Qt. Royal Purple will last me 3-5 years.
Try chasing your truck in a car for a top speed run.At night.It's cooler,then. About a 1/4 turn on the carb on the high speed jet will make it sing happier.Cooler is better.
#72
Tech Apprentice
iTrader: (3)
Aaargghh! So I got home after picking up some parts today, all ready to sit and work on my Savage, but it turns out the roto-start gear set I picked up was the wrong one! SO she sat on the desk last night staring at me. I also picked up a 49T spur gear, the only one in the city as I had to hit a couple places looking for it.
And I bought a XXX-SCT.
And I bought a XXX-SCT.
#73
Tech Apprentice
iTrader: (3)
So popped into the shop at 9am AMD swapped for the right rotostart gear I needed. Also nabbed a Lipo for the XXX-SCT. Got home and reassembled the engine putting on the 18T clutch bell. Didn't have time to work on the spur gear but did get the Roto start reassembled. Probably do the spur gear this evening and see if I can get my Savage up and running again.
#74
Went to the beach the other day
Now my High-Low shift servo in the E-Maxx is fried
Found a spare 2018 servo for now but I'll get a new waterproof servo soon
Now my High-Low shift servo in the E-Maxx is fried
Found a spare 2018 servo for now but I'll get a new waterproof servo soon