03-22-2012, 05:53 PM
Join Date: Oct 2011
Location: Round Lake, IL
3.8" Stock wheels?
Ah, ok. Maxx Chevron's.
Those are 5.75" tall wheels.
Trenchers are 6.89".
You'll want to gear down, if you want to keep your performance the same.
I run 19/65 on 6.5" Trencher-X's. It gives about a 1.14:1 rollout, on 5S LiPo.
Stock E-Maxx is 17/68, which could possibly give you the right gearing depending on your setup. Do you have the Brushless E-Maxx, or the Twin-Titan 16.8v E-Maxx?
TRX E-Maxx - KD 2039kv/HW 150A | TRX Summit - DeWalt 14.4v/TRX EVX2
TRX Slashapede 4x4 - Vel. 3500/HW SC-8 | TRX Stampede 4x4 - Vel. 3500/BL Hobbies 120A
TRX Slash 4x4 Ult. - HS 3500kv/HW SC-8 | Losi E-Muggy - Leopard 2000kv/HW 150A
Tam. Stad. Blitzer - KT 19T/HW 1060 | Ofna Ultra LX2-E - TP 2400kv/HW SC-8