The current setup uses Nanda Super Big Bore shocks. They are called a different name in the US though - could be TQ or something.
The springs are Hong Nor Super Big Bore blue - hardest spring rate available. I've tried many shocks - Thunder Tiger S3 rear shocks, CEN shocks but these super big bores work well. However, the truck is so heavy that a single M3 screw is not enough to hold the shock in place. Alway ended up bent after a couple of jumps (biggest jump at my track is a 10ft air time monster of a jump). Had to double up on the screw with additional reinforcement to hold them in place. Can't see it in the photos though. Will try to post some updated ones showing this setup.
BTW, the Hong Nor SSB shocks work just as well. I have them in the nitro savage.
Quote:
Originally Posted by snowboard094
that is a kick ass truck. What shocks are those?
|
Regards,
Joe Ling
Added new lid :
__________________
HN X2 CR OS Speed WC Ti, HN X1 CR Polyquest 5S Neu 1512 2000kv MMM
HN X2 Neu 1515 2000KV Polyquest 5S 6000mah MMM, HN X2 OS Speed WC
Hyper 9e Medusa 2000KV 4S 6000mah MMM, Hyper mini STe Medusa 3300KV 3S 2500mah MM
Savage FLM ext. 5S MMM 8XL, E REVO Medusa 1600KV 6S MMM
Thunder Tiger ST Neu 1515 2000KV Lutach esc 5S 4800mah
Last edited by joeling; 06-16-2009 at 08:49 AM.
|
