Revo brushless conversion
#1
Revo brushless conversion
I just finished installing my Medusa 36-70-2000 motor on my revo conversion. It's paired with an MMM V3 running on 5S 5000mah neuenergy lipos. Right now, it's the default setting (10%) on the MMM.
Pictures:
Side by side with the Tekno RC Neu 1515 1Y in my Kyosho ST-RR conversion.
Connectors soldered
I put some spacer on the mounting plate to move the motor a little bit forward so I can use 2 setscrews on the pinion.
Videos after setting the MMM:
Pictures:
Side by side with the Tekno RC Neu 1515 1Y in my Kyosho ST-RR conversion.
Connectors soldered
I put some spacer on the mounting plate to move the motor a little bit forward so I can use 2 setscrews on the pinion.
Videos after setting the MMM: