building a pulling sled
#1
building a pulling sled
i got the idea to build my own pulling sled for monster trucks and pulling trucks. if the finished product goes well i plan on marketing them for a cheeper price then i have seen them for. just to give you some highlights( dont want to give away all the detals)
weigh box will be chain driven
sled will have adjustable platform and hitch
sled will ride on t-maxx tires
the whole sled will be 42in in long and 18 in wide the box will be 21 in wide
with these few details please share your comments and thoughts
weigh box will be chain driven
sled will have adjustable platform and hitch
sled will ride on t-maxx tires
the whole sled will be 42in in long and 18 in wide the box will be 21 in wide
with these few details please share your comments and thoughts
#2
sounds interesting. i'd buy one depending on price
#3
Tech Rookie
HOW DID THE SLED COME OUT..........
#5
how are you going to get the tray to slide forward?
#8
really? the biggest Troll? how about now?
#9
This thread may be ten years old, but my sled is almost 30.
#10
Tech Apprentice
I.got.the.same.sled and a few clod busters at my dads. Probably 30 years old too.
#11
Tech Rookie
pulling sled
that width of the box is horrendous! ! ! if ANYTHING it should never be wider than the inside of the tires. they become too unstable if you have weight hanging over the tires.. Go look at you tube vids and use thoses guys as a starting point....I am also building a rig for comp class crawlers.............. should be about 40lbs when done with 170 lb capacity if necessary